Installation - D-Link DHD-131 User Manual

Section 2 - Installation
Below are steps to install and set up your MainStage™ TV Adapter.
Step.1
Connect an HDMI cable to the HDMI port on your MainStage TV Adapter and the other end into the HDMI Input on your TV. You may instead connect
using composite connections if HDMI is not available.
Step.2
Connect the supplied power adapter to the back of the MainStage™ TV adapter and the other end to a power outlet or surge protector. The MainStage™
TV adapter LED is red when it powers up. Then the LED turns yellow to indicate it is ready, but is not yet wirelessly connected to your computer.
HDMI
HDMI Connection
Step.3
Power on your TV and select the correct TV input source. Please refer to your TV documentation for instructions on how to change your input source.
Step.4
The Startup screen displays on your TV within 30 seconds. If this screen does not appear, make sure your TV
is set to the correct video input and all the cables are firmly secured.
D-Link DHD-131 User Manual

Installation

I N C D
I N C D
HDMI
I N C D
I N C D
Composite Connection
4