Eclipse TD 307 Owner's Manual page 5

15. AC Adapter
Only use the AC adapter supplied and
ensure that you use it in a well-ventilated
location free from dampness.
16. Extended non-use
If the unit is likely to be unused for an
extended period, shut off power and
disconnect from power supply.
17. Volume Adjustment
If abnormal noise is produced during play
at high volume, reduce the volume level.
Distorted sound can cause overheating of
speakers and amplifier. Before switching
power supply on, set the amplifier volume
to minimum. Sudden, loud noise can
cause damage to hearing.
18. Connecting TV/other audio equipment
When connecting a TV or other audio
equipment, always shut off power, read
the operating manual for each device and
follow the instructions for connection. Use
only designated cables.
Use of non-designated cables or extension
cables can cause heat production, burns,
and fire.
19. Antenna
An outdoor antenna should be located
away from power lines.
20. Maintenance.
Before undertaking
disconnect from power supply. Have the
interior of the unit cleaned approximately
once a year by qualified personnel.
Accumulated dust inside and long intervals
without cleaning can cause fire or
malfunction. Before cleaning this product
make sure that the power is turned off and
the power cord is disconnected from the
wall outlet. Clean with a soft cloth. If the
product is particularly dirty, moisten the
cloth and wring out before use. Complete
by wiping with a soft, dry cloth. Do not use
liquid solvents such as alcohol or thinner to
clean this product, as such chemicals can
damage the cabinets.
21. Servicing
The unit should be serviced by qualified
personnel when:
The power-supply cord or plug has been
damaged, or
Objects or liquid have entered the unit,
22. Children
23. Temporary Fault
maintenance
5
or
The unit has been exposed to rain; or
The unit is malfunctioning, or
The unit has been dropped or the
cabinet has been damaged.
Use particular care in households where
children are present.
If this product receives a strong external
shock (such as from an impact, static
electricity or a power surge due to
lightning), or if this product is used
incorrectly, it may stop working properly.
In such cases, press the power button to
turn the power off and then back on again,
and check if this product is working
normally.