Page 1
AKAI STEREO INTEGRATED AMPLIFIER AM-M570 OPERATOR'S MANUAL To ensure optimum performance and listening enjoyment, please read this operator's manual thoroughly. English Paga 1-14 Franqais Page 15-28 Deutsch Seite 29-42 Nederlands Pagina 43-56 Espanol Pågina 57-70 Akai—Creative At Heart.
Page 2
Precautionsandtable of contents WARNING Lithium battery To preventfire or shockhazard,do notexposethis Thisproduct u sesa lithium battery formemory back-up. appliance to rain or moisture. Thelithium batteryshould onlybereplaced byqualified service personnel. I-En Improperhandlingmaycauserisk of explosion. 24-En Power requirements Power requirements for electrical equipment differ from area to area.
Page 3
What you should know to protect yourself Table of contents Never touch the plug with wet hands. Precautions and table of contents • Always pull out by the plug and never the cord. Connections • Only let a qualified professional repair or reassemble the The speaker system amplifier.
Page 4
Connections Before beginning The speaker system Turnoff all the componentsbeforeconnecting. Speaker placement Connect the power cord last The playback characteristicsof the speaker system(s)are Makesure that you connectthe white PIN-plugto the left greatly influenced by the placement and the room in which the (white) jack and the red PIN-plug to the right (red) jack.
Page 5
FM antenna AM bop antenna Turntable Tuner OUTPUT SPEAKERS-L SPEAKERS-R TUNER Amplifier pHONO TAPE PLAY TAPE Left channel Right channel LINE OUT LINE IN Cassette deck Speaker system Speaker system Sc — SYNCHRO SYNCHRO OUTPUT CD player...
Page 6
Expanding your Hi-Fisystem Placement connections About the short pins This amplifier is equipped with PROCESSOR IN and OUT The short pins connect the pre-amp and power-amp sec- jacks as well as DAT/VCR PLAY and REC jacks. The PRO- tions of the integrated amplifier. Only remove these pins CESSOR IN and OUT jacks can be used for connection of an when connecting a graphic equalizer.
Page 7
Controls(Amplifier) AKA' O POWER Button O SOURCE DIRECT Button and Indi- BASS Tone Control To turn the power on and off. To adjust the low note (bass) level. cator When engaged, the input signal by- When set to O, the control has no ef- O MUTING Indicator passes the BASS, TREBLE and BAL- fect...
Page 8
Controls (Remote controlunit) This remote control unit can be used for basic operation of the following components: Amplifier AM-M570 Tuner AT-M670/L CD player . CD-M670 Cassette deck HX-M670W/HX-M770W Amplifier control section VOLUME MUTE Button: Attenuates Transmitting window playback volume. VOLUME...
Page 9
Operation How to load batteries Point the remote control unit at the REMOTE SENSOR win- dows, and press the desired operation button. If the remote control unit will only operate from a short distance or a narrow angle, this indicates that the battery voltage is low Replace both batteries with new ones.
Page 10
Playback Before beginning • Turn on all the components. When the amplifier's power is turned on, the protection cir- • Set the VOLUME to 00. cuit will beengaged, preventing sound output for a few sec- • Set the SOURCE DIRECT button to Ä...
Page 11
Operationdetails Muting: Reducing the playback volume instantly MUTE The mutesystem can beused to instantly reduce the playback volume without using the VOLUME control. This is convenient when answering a sudden phone call, etc. Press the remote control's MUTE button. The MUTING indicator will light up and the playback volume will be instantly reduced.
Page 12
Recording Before beginning Turn on all the components. • If using a DAT for recording, set it for analog recording. POWER Operation Select a recording source with the input select buttons as During recording follows: • Do not touch the input select buttons as this will interfere To record from a record with recording.
Page 13
• Clean the cabinet with a soft, dry cloth. as well as a clear description of the existing trouble. Then con- • If the cabinet is very dirty, clean it with a mild detergent. tact your nearest authorized Akai service station. • Neveruse paintthinner, etc.
Page 14
190 w The provided RC-S770 remote control unit can be used for Power band width 5 Hz to 80 kHz/O.1% basic remote control operation of the following Akai com- S/N (IHF-A) ponents: AT-M670/L tuner, AM-M570 amplifier, CD-M670 PHONO (MM) 72 dB...
Need help?
Do you have a question about the AM-M570 and is the answer not in the manual?
Questions and answers