Table of Contents 1 - Getting Started Welcome ... Player Overview ... LCD Overview ... Inserting the Battery ... Connecting the Earbuds ... Installing the Software ... 2 - Loading Your Tunes Connecting the Player to your Computer ... Using Windows Media Player ... Adding Tracks to your Media Library ...
1 - Getting Started Welcome Congratulations on your purchase of this Rave-MP portable MP3 player. Not only does this versatile unit fit in the palm of your hand and play all your favorite MP3 and WMA files, it also has a built-in FM tuner (with recording capability), doubles as a removable drive, and even records and plays back voice recordings.
Player Overview Stereo Headphone Jack - Connects to the supplied earbuds or other headphones equipped with a 1/8” (3.5mm) stereo mini-plug. Microphone - Speak here when using the built-in voice recorder.
Page 6
Battery/Memory Card Cover - Remove to install a single AAA battery (alkaline or NiMH). Also remove to install an optional MMC or SD memory card (up to 512MB). LCD Screen - Displays the current status of the player; see page 7. VOLUME +/- Buttons - Adjust the volume.
LCD Overview ROCK Alien Crime Syn Forever is Rock Ten Songs in the Key Of 02:23 Indicators: EQ Setting - Displays current EQ mode (Normal, Rock, etc.) Shuffle - Displays current Shuffle mode (On or Off). Repeat - Displays current Repeat mode (Repeat One, Repeat All, or Off). Hold - Displays current Hold status (On or Off).
Inserting the Battery Remove the battery cover as shown. Insert the supplied AAA battery, paying attention to the correct polarities (+ and -). Replace the cover. Connecting the Earbuds • Connect the supplied earbuds as shown. AAA Battery Earphone Plug...
Installing the Software Turn on your computer and insert the Installation CD into the CD-ROM drive. The Welcome screen is displayed. Install the driver (Windows 98SE only). • No driver is required for Windows ME, XP, 2000 or Mac OSX. Install Windows Media Player 9.
2 - Loading Your Tunes Connecting the Player to your Computer In order to download tracks to the player, you must first connect the player to your PC or Mac using the supplied USB cable. Connect the smaller end of the supplied USB cable to the mini-USB port on the player as shown.
Using Windows Media Player You can use Windows Media Player 9.0 to manage your music files, copy tracks from your audio CDs, transfer tracks to the player, and more. The following is an overview of the options on the Windows Media Player taskbar: Now Playing - Watch/listen to currently playing media.
Adding Tracks to your Media Library Windows Media Player will automatically gather all MP3 and/or WMA files on your PC into a media library, where they can be played, edited, burned to CD, or copied to your Rave-MP player: Click Tools > Search for Media Files (or press F3). In the “Add to Media Library by Searching Computer”...
Transferring Tracks to the Player To copy files from your PC to the player: Make sure the player is powered on and connected to your PC using the supplied USB cable. Click Copy to CD or Device. Under “Items on Device,” select “Removable Disk” to view the contents of the player.
Using Other Music Management Applications In addition to Windows Media Player 9.0, the Rave-MP player is compatible with other music management applications. If you prefer, you can use these applications to manage your music files, burn your CDs, load your music, etc. •...
Using the Player as a Removable Drive If you prefer, you can simply drag and drop files to the player, which appears as a removable hard drive on your PC or Mac. • NOTE: The player will not play DRM-protected files (such as those purchased from online music stores) unless they are copied to the player via Windows Media Player or the music management software compatible with your online music store.
Safely Disconnecting the Player If you are using Windows ME/2000/XP, it is recommended that you safely unplug the player as follows: Double-click the “Safely Remove Hardware” icon in the Windows toolbar. Select the player from the list of Hardware Devices. Click Stop.
3 - Using the Player Basic Operations Powering On the Player • To turn on the player, press POWER • To turn off the player, press and hold POWER Basic Playback • To play the current track, press PLAY/PAUSE • To pause playback, press PLAY/PAUSE •...
Main Menu Overview Press MENU to open the Main Menu and access these special features: Main Menu Play Music Tuner Voice Equalizer Settings FM Tuner Tuner Recordings... p.20-22 Voice Recordings Record Recordings... p.23 Equalizer Normal 5-Band EQ p.24 Rock Jazz Classical p.25-26 Settings...
Playing Albums, Artists & Genres The Play Music menu includes a variety of ways to browse and play your music. Press MENU Select Play Music and press ENTER. Select from the following options: • Play All - Plays all tracks on the player in order. •...
Using the FM Tuner Switching to FM Tuner Mode Press MENU Select Tuner and press ENTER. Select Tuner again and press ENTER. The FM Tuner LCD is displayed: 100.30MHz MANUAL Indicators: Strong Signal - Appears if a strong FM radio signal is received. FM Frequency Slider - Graphically displays FM radio band.
Using the FM Tuner While you are in FM Tuner mode, you can search for stations, save Presets and select Presets. Searching for FM Stations • To manually search for stations (in 0.1 step increments), press • To automatically scan for stations, press and hold Saving Presets •...
FM Radio Recording & Playback Recording FM Broadcasts Not only can you listen to the radio, you can record your favorite broadcasts and listen to them later. Press MENU Select Tuner and press ENTER. Select Tuner again and press ENTER. Use the buttons to select the desired radio station.
Voice Recording & Playback Recording Your Voice Record your next lecture, or just spy on your friends with the built-in voice recorder. Press MENU Select Voice and press ENTER. Select Record and press ENTER. The player will begin recording using the built- in microphone.
Adjusting Equalizer Settings Setting the 5-Band Equalizer You can manually adjust the 5-Band Equalizer to personalize your listening experience. Press MENU Select Equalizer. Select 5-Band EQ. Set each of the five frequency sliders to the desired levels. Each band can be adjusted from -14 to +14.
4 - Customizing Your Player Inside the Settings Menu Shuffle/Repeat Options Sets your desired Shuffle and Repeat modes. Press MENU Select Settings and press ENTER. Select Playback and press ENTER. Select from the following options: • Shuffle - Select “On” to shuffle tracks during playback.
Contrast Options Sets the Contrast setting for the LCD screen. Press MENU Select Settings and press ENTER. Select Contrast and press ENTER. Adjust the screen contrast. Resume Playback Options Sets which track to play when you restart the player. Press MENU Select Settings and press ENTER.
Player/Storage Information Press MENU Select About and press ENTER. Select from the following options: • Player - Select “Player” to view the firmware version of your player. This is necessary when checking for firmware upgrades (see below). • Storage - Select “Storage” to view the status of the internal and external memory, including the total used and available space.
5 - Need Help? Troubleshooting Q What type of files can I play? A MP3 and WMA files. You cannot play AAC files or DRM protected files that have been copied directly to the player. Q Why can’t I play DRM protected files? A DRM-protected files will only play if you copy them to the player through Windows Media Player or through the music management software provided by the online music store where you purchased the files.
Technical Specifications Model Name ... Amp128/256 MP3 Decoding Format ... Constant or Variable bit rate (8~320kbps), WMA Decoding Format ... Constant bit rate (5~192kbps), Internal Memory ... 128/256MB Internal Flash Support ... SD/MMC (16/32/64/128/256/512MB) LCD ... 128x64 dot-matrix LCD display with LED backlight Voice Record Format ...
Rave-MP Limited Warranty Who Provides the Limited Warranty During the warranty period, the Rave-MP Warranty Administrator will honor service for 90 days parts and labor from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Who is Protected This warranty protects the original consumer owner of this Rave-MP product.
Page 31
Other Warranty Coverage Commercial, Industrial or Educational use has the same warranty coverage as stated in this warranty. What are the Exceptions This warranty does not cover: (1) Normal maintenance service, such as cleaning. (2) Damage from misuse, abuse neglect or accident, natural disasters or Acts of God. (3) Cabinetry, decorative parts, A/C adapters, knobs or buttons.
Important Safety Instructions • Read and keep these instructions. Follow all instructions. Heed all warnings. • To reduce the risk of fire or electric shock, do not use or operate this apparatus in or near water or wet locations. Do not spill liquid on this apparatus. •...
Product Care • Exposure to extreme hot or cold temperatures may cause damage to the player or cause it to malfunction. Do not expose the player to direct sunlight continuously or leave it in a vehicle with the doors and windows closed. The case may become deformed or discolored or the player may malfunction.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.