Advertisement
Ultimate control and
communication with
Datatronic III
Front & rear Dual Control
This remarkable system provides
excellent control of semi-mounted
ploughs by automating the furrow
entry and exit. At the same time
the system adjusts the plough's
depth wheel in relation to the rear
linkage. The same system is also
used to control implements on the
front linkage, automating depth
settings and the entire operation,
in synchronisation with the
rear linkage.
Trailed Implement Control
Massey Ferguson's unique Trailed
Implement Control (TIC) system
provides draft and wheelslip
control for trailed implements,
optimising performance and
enhancing machine productivity.
Simple spool valve control
Up to fi ve electro-hydraulic spool
valves are set and adjusted with
Datatronic III. The clear screen is
used to precisely adjust oil fl owrate
and kick-out timing and enable
or disable the 'fl oat' position,
providing accurate control of ram
extension and retraction.
10
Dyna-VT settings
MF 7400 and MF 8600 Series
tractors fi tted with the Dyna-VT
transmission, now have a new
screen which allows the Dyna-VT
parameters to be set through the
'work screen' application – a clear
and easy way to make the most of
all Dyna-VT's useful functions.
Memorise data and settings
Six different memories enable
the system to record information
during operation on area worked,
fuel use, hours worked and
much more.
All the settings and parameters for
up to six different implements can
be stored by Datatronic III.
Securely back-up
those tractor settings
A truly unique feature of
Datatronic III is the ability to save
the memorised tractor settings to
an SD Card and manage those
settings before commencing work
using the supplied PC software.
Information station
One of Datatronic III's most
powerful features is the ability to
record a wide range of operating
data directly to the SD Card.
Datalogging allows the operator
to input information on the
operator, job name, farm name,
fi eld name, operation type and
implement width.
All-seeing Video link
Pictures from an on-board camera
can be displayed on the Console I
screen allowing operators to
monitor complex implements
or simply improve safety and
effi ciency when reversing.
Advertisement
