Advertisement
Quick Links
Glassless Mirror
Inside The Box
Glassless Mirror
Inside The Box
Tools Required
Spirit level
Tape measure
Power drill
Drill Bits
Pencil
Screw driver
Rubber hammer
Safety glasses
Handle with care:
Risk of injury or product damage. Handle the
Glass Less Mirror with care during installation.
Do not allow the mirror to come in direct
contact with metal objects or hard surfaces as
it may lead to damage. Always use soft
gaskets or padding between the mirror and
any hard surfaces during installation. Avoid
using tools directly on the mirror edges to
prevent chipping or breakage. Do not attempt
to alter the shape or size of the mirror as it is
designed to fit specific settings without
modifications.
Advertisement
Related Manuals for FAB GLASS AND MIRROR GLM30x40CH
Summary of Contents for FAB GLASS AND MIRROR GLM30x40CH
- Page 1 Glassless Mirror Inside The Box Tools Required Spirit level Tape measure Glassless Mirror Power drill Drill Bits Pencil Screw driver Rubber hammer Safety glasses Inside The Box Handle with care: Risk of injury or product damage. Handle the Glass Less Mirror with care during installation. Do not allow the mirror to come in direct contact with metal objects or hard surfaces as it may lead to damage.
- Page 2 Glassless Mirror Glassless Mirror d Hard Objects: Handle Gently: Screw Avoid Hard Objects: touch the GlassLess Do not press on the Glass Less Use se Do not touch the GlassLess Important Note with hard objects to Mirror surface to avoid distorting ensurin Mirror with hard objects to t scratches or damage...
- Page 3 Step 1: Leveling the Mirror Frame • Place the horizontal bubble level on top of the mirror frame to ensure the mirror is perfectly level. • Mark the top and bottom line on the wall using a pencil along the frame’s edge, following the level’s guide.
- Page 4 Step 2: Positioning the Brackets • Position the four L-shaped brackets at each corner of the marked frame area. • Ensure each bracket aligns with the marked line for accurate placement before securing.
- Page 5 Step 3: Drilling Holes for Brackets • Use a drill to create four holes where the bracket markings align on the wall. • Make sure to drill the holes with appropriate depth to fit the expansion screws securely.
- Page 6 Step 4: Leveling the Mirror Frame • Insert the expansion screws into the drilled holes to prepare for bracket mounting. • Ensure each expansion screw is flush with the wall for a stable bracket fit.
- Page 7 Step 5: Positioning the Brackets • Attach the L-shaped brackets to the wall by aligning them with the expansion screws. • Secure each bracket tightly using the self-tapping screws provided.
- Page 8 Step 6: Drilling Holes for Brackets • Carefully place the mirror frame onto the mounted brackets, aligning the edges evenly. • Tighten the screws at the top and bottom to lock the mirror securely in place on the wall."...
Need help?
Do you have a question about the GLM30x40CH and is the answer not in the manual?
Questions and answers