Cell Menu - MSI MS 7030 - K8N Neo Platinum Motherboard User Manual

MS-7030 ATX Mainboard
The items in Cell Menu includes some important settings of CPU, AGP, DRAM and
overclocking functions.
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
Current CPU / DDR Clock
These two items show the current clocks of CPU & DDR. Read-only.
DRAM Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
Max Memclock (Mhz)
User can place an artificial memory clock limit on the system. Please note that memory
is prevented from running faster than this frequency. Setting options: [Auto], [100],
[133], [166], [200].
1T/2T Memory Timing
This setting controls the SDRAM command rate. Selecting [1T] allows SDRAM
signal controller to run at 1T (T=clock cycles) rate. Selecting [2T] makes SDRAM
signal controller run at 2T rate. 1T is faster than 2T. Setting options: [1T], [2T], [Auto].
CAS# Latency (Tcl)
This controls the CAS latency, which determines the timing delay (in clock cycles)
before SDRAM starts a read command after receiving it. Settings: [Auto], [2.0], [2.5],
[3.0]. [2.0] increases the system performance the most while [3.0] provides the most
stable performance.
3-24

Cell Menu