GE JVM6175SK Dimensions And Installation Information

JVM6175SK/EK/BL/YK
GE 1.7 cu. ft. Over-the-Range Sensor Microwave Oven
®
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE:
Requires 120V grounded outlet. Electrical receptacle
must be located in cabinet above microwave oven. No addi-
tional wiring, venting or cabinet rebuilding necessary in Many
cases. Complete detailed, easy-to-follow installation instruc-
tions and convenient full-size templates are packed with the
microwave oven.
IMPORTANT INFORMATION:
microwave oven over a range, allow minimum of 2" from
bottom of microwave oven to top of range backguard to
allow for removal of light covers.
VENTILATION OPTIONS:
The microwave ovens are
designed for adaptation to the following three types of
ventilation:
-Outside exhaust (vertical – as shown)
-Outside exhaust (horizontal)
-Recirculating (non-vented ductless – see Filter Kit drawing)
INSTALLATION INFORMATION:
not intended to be used for installing unit described. Before
installing, consult installation instructions packed with
product/kit for current dimensional data.
For answers to your Monogram, Café™, GE Profile™ or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
When installing the
This information is
Minimum distance from
door hinge side to
adjacent wall should
equal 1/2"
23-9/16"
98°
Door open
(without obstruction)
29-7/8"
66" MIN.
Mounting 30" MIN.
width
height from
required
floor
13"
MAX.
12"
MIN.*
15-9/16"
16-5/16"
(rear)
*Maximum depth
15-11/16"
with JX15
Bump Out Kit is 16"
Bump Out Kit
sold separately.
Exhaust outlet
connects to
3-1/4"x10" duct
Specification Revised 10/23