On-Chip SATA Controller
These items allow users to enable or disable the SATA controller.
RAID M ode
This item is used to enable/disable the RAID function for SATA devices.
I/O Device Configuration
Press <Enter> to enter the sub-menu:
COM Port 1/2
Select an address and corresponding interrupt for the first serial port.
Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC]
[278]
[378]
Parallel Port M ode
This item allows you to select the parallel port mode.
Line Printer port 0
Line Printer port 2
Line Printer port 1
BIOS Setup
3-13