System Setup - Scott DPXI865 CS Owner's Manual

Playback Preparation / Quick Operation Guide
1. Connecting to power ( AC/DC adapter, external DC power source through Cigarette connector
cable or with attached battery pack ).
2. Lift the main cover up ( display screen ), and open the disc cover by pressing the OPEN knob.
3. Load the disc and close the door lid.
4. Switch on the unit by sliding the ON/OFF button to ON.
5. Adjust the volume to your desired level.
General Setup
Access the GENERAL SETUP by pressing the " SETUP " button on the unit or remote control.
1. TV Display
NORMAL / PS – If you want the movie to fill the entire screen of your TV.
NORMAL / LB – If you want to see movies in their original aspect ratio.
The movie might appear with black bars at the top and bottom of the screen.
WIDE – You can select this setting if your DVD player is connected to a wide screen (16:9)
TV.
2. TV Type
Select the TV Video output format (PAL or NTSC) to match your TV.
3. Angle Mark
The function only works for DVD disc having scenes recorded at different angles.
ON/ OFF – With this switched on, you will be notified if alternative viewing angles are
available.
4. OSD Language
The languages menu enables you to set preferred language options for the DVD player's
menu.
5. Screen Saver
When activated, the screen saver automatically works if there has been no operation for a
period of time.
6. Last Memory
Last memory allows playback at the point where the disc was stopped, if the disc is taken out
from the unit and then inserted again.
BASIC SETUP

SYSTEM SETUP

GB–13