Dis-Assembly & Assembly; Stand; Stand Bracket; Back Cover - Memorex MLT2022SM Manual

3.Dis-Assembly & Assembly
3.1.Stand Dis-assembly and Assembly
Refer to the picture at right side.
(No Screws need)
D1) Dis-assembly
Push the tenon (A) under stand base (B).
Pull the stand base () and then take it off.
A15)
Plug the tenon of bracket into stand base ().
3.2.Stand bracket Dis-assembly and Assembly
Refer to the picture at right side.
(, 3 pcs)
D2) Dis-assembly
Take the screws () off.
Take the stand bracket () off.
A14) Assembly
Put the stand bracket () on.
Lock the screws () on stand bracket.
3.3.Back cover Dis-assembly and Assembly
Refer to the picture at right side.
(P+3*10, 4 pcs)
D3) Dis-assembly
Take the screws (EA0305111) off.
Take the back cover () off.
A13) Assembly
bcak cover
Put the () on.
screws
Lock the (EA0305111) on.
3.4.Keypad wire Dis-assembly and Assembly
Refer to the picture at right side.
(No Screws need)
D4) Dis-assembly
Take the wire () off.
A12) Assembly
Plug the wire () on.
Copyright©2005 Aplus Technic® All Rights Reserved
Torque
( : 4.5±0.5KG)
Torque
( : 4.5±0.5KG)
13