Table of Contents
Advertisement
REMOTE BATTERY INSTALLATION
Follow these precautions when using a battery in this device:
1.
Use only the size and type of battery specified.
2.
Be sure to follow the correct polarity when installing the battery as
indicated in the Battery Compartment. A reversed battery may cause
damage to the device.
3.
If the device is not to be used for a long period of time, remove the
battery to prevent damage or injury from possible battery leakage.
4.
Do not try to recharge a battery not intended to be recharged; it can
overheat and rupture. (Follow battery manufacturer's directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
REMOTE CONTROL
1.
2.
3.
BATTERY PRECAUTIONS
15ft
30
30
Remove the Battery Compartment by
pressing in on the tab and then sliding the
compartment out.
Install a CR2025 battery, paying attention
to the polarity diagram in the Battery
Compartment (positive side up).
Replace the Battery Compartment.
NOTES:
• When there is an obstacle between
the unit and the transmitter, the
transmitter may not operate.
• When
incandescent lamp, fluorescent
lamp or any other strong light
shines on the Remote Sensor of
the unit, the remote operation may
be unstable.
5
direct
sunlight,
an
Advertisement
Table of Contents
