You need to "Disable" your password first before you can use this "Configure
Size" (resizing) function if you have already setup a password. Follow section
E3 of this manual to disable your password. It may be necessary to remove and
plug your device in again after disabling the password.
A warning message will show, telling you that data will be destroyed. If you have
not yet backed up your data. Press
up your data first; otherwise, press
Document No.: M0-0001-4504-1
Effective:
Version:
Page:
(cancel) to cancel the operation and back
(apply) to continue.
4-Dec-2009
D
- 12 -