Related Manuals for Bass RSHU
Summary of Contents for Bass RSHU
- Page 1 RADAR FLOW METER RSHU User Manual Bass Ölçme Enstrümanları Ltd. Şti. Esenşehir Mah. Füsun Sok. No:59 Ümraniye/İSTANBUL TR-34776 +90 216 660 01 63-64 bass.com.tr...
- Page 2 4.2 Angle of installation 4.3 Mounting height 4.4 Radar FOV 4.5 Mounting position 5. Wiring 5.1 Wiring instruction 6. Frequently Asked Questions Bass Ölçme Enstrümanları Ltd. Şti. Esenşehir Mah. Füsun Sok. No:59 Ümraniye/İSTANBUL TR-34776 +90 216 660 01 63-64 bass.com.tr...
- Page 3 1. Product Description The RSHU radar flow meter uses radar technology to measure water velocity and water level at the same time, and converts water flow through an integral model. The water flow can be measured in real time all day, and the non-contact measurement is not easily affected by the working conditions.
- Page 4 RADAR FLOW METER USER MANUAL 3. Dimension Dimensions in mm The RSHU flow meter has a compact structure and comes with horizontal bubbles for installation and adjustment. Bass Ölçme Enstrümanları Ltd. Şti. Esenşehir Mah. Füsun Sok. No:59 Ümraniye/İSTANBUL TR-34776 +90 216 660 01 63-64...
- Page 5 The gyroscope in the radar automatically compensates the flow rate according to the time deflection Angle, so precise adjustment is not necessary. Bass Ölçme Enstrümanları Ltd. Şti. Esenşehir Mah. Füsun Sok. No:59 Ümraniye/İSTANBUL TR-34776 +90 216 660 01 63-64...
- Page 6 The RSHU has a water velocity measuring module FOV of approximately 12°x 25°and a water level measuring module FOV of approximately (6°x 6°) .
- Page 7 2. The closer the mounting position is to the river bank, the more susceptible it is to factors such as water grass and others along the river bank. RSHU 6 3. It is recommended that the mounting position as close to the center of the river as possible.
- Page 8 Baud rate 9600, reverse wiring is not accepted. Green 485B Baud rate 9600, reverse wiring is not accepted. RS485 ground， wire it if necessary Yellow 485_GND Socket Positive 9-30V Bass Ölçme Enstrümanları Ltd. Şti. Esenşehir Mah. Füsun Sok. No:59 Ümraniye/İSTANBUL TR-34776 +90 216 660 01 63-64 bass.com.tr...
- Page 9 Check the working current. Ensure that the standby current is 15-13mA@24v when no data is exchanged. d. Check whether the serial port number and baud rate are correct. Check whether the modbus address is the same as expected. Bass Ölçme Enstrümanları Ltd. Şti. Esenşehir Mah. Füsun Sok. No:59 Ümraniye/İSTANBUL TR-34776 +90 216 660 01 63-64...
Need help?
Do you have a question about the RSHU and is the answer not in the manual?
Questions and answers