priate information. After the preparations mentioned in the previous chapters have been
accomplished, follow the installation overview of the desired installation mode to install
SUSE Linux Enterprise Server on your system.
As described in
Section 2.1, "Making the Installation Data Available"
are two different installation modes for Linux on IBM System z:
• LPAR Installation
• z/VM Installation
Procedure 2.1 Installation Overview of LPAR Installation
1 Prepare the devices needed for installation. See
(page 26).
2 IPL the installation system. See
3 Configure the network. See
4 Connect to the SUSE Linux Enterprise Server installation system. See
"Connecting to the SUSE Linux Enterprise Server Installation System"
5 Start installation using YaST and IPL the installed system. See Chapter 3, Instal-
lation with YaST (↑Installation and Administration).
Procedure 2.2 Installation Overview of z/VM Installation
1 Prepare the devices needed for installation. See
(page 27).
2 IPL the installation system. See
3 Configure the network. See
4 Connect to the SUSE Linux Enterprise Server installation system. See
"Connecting to the SUSE Linux Enterprise Server Installation System"
5 Start installation using YaST and IPL the installed system. See Chapter 3, Instal-
lation with YaST (↑Installation and Administration).
Section 2.3.1, "LPAR Installation"
Section 2.4.1, "LPAR Installation"
Section 2.5, "Network Configuration"
Section 2.3.2, "z/VM Installation"
Section 2.4.2, "z/VM Installation"
Section 2.5.1, "z/VM Installation"
(page 21), there
(page 29).
(page 33).
Section 2.6,
(page 36).
(page 30).
(page 34).
Section 2.6,
(page 36).
Preparing for Installation
25
Need help?
Do you have a question about the LINUX ENTERPRISE SERVER 10 - ARCHITECTURE-SPECIFIC INFORMATION 08-04-2006 and is the answer not in the manual?