Novell LINUX ENTERPRISE DESKTOP 10 SP1 - START UP GUIDE 03-15-2007 Manual page 23

• For eServer i5/p5, System i5/p5, and OpenPower, see also Section 2.1,
"Preparing for Installation on IBM eServer i5/p5, System i5/p5, and Open-
Power Models" (Chapter 2, Preparation, ↑Architecture-Specific Information)
5 Configure a client for accessing the system during the installation. See also Sec-
tion 2.4.3, "Client for the Operation of the Installation Software" (Chapter 2,
Preparation, ↑Architecture-Specific Information).
6 For iSeries, set up the IPL source on the i5/OS side and see also Section 2.4.5,
"IPL: Starting the NWSD (WRKCFGSTS *NWS)" (Chapter 2, Preparation,
↑Architecture-Specific Information).
7 Install the software and perform the basic network configuration. See also
Chapter 3, Installation with YaST (↑Installation and Administration).
Installation Procedure 17