Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY Manual page 257

ocf:Route (7)
ocf:Route — Manages network routes
Synopsis
OCF_RESKEY_destination=string OCF_RESKEY_device=string
OCF_RESKEY_gateway=string OCF_RESKEY_source=string Route [start | stop
| monitor | reload | meta-data | validate-all]
Description
Enables and disables network routes. Supports host and net routes, routes via a gateway
address, and routes using specific source addresses. This resource agent is useful if a
node's routing table needs to be manipulated based on node role assignment. Consider
the following example use case: - One cluster node serves as an IPsec tunnel endpoint.
- All other nodes use the IPsec tunnel to reach hosts in a specific remote network. Then,
here is how you would implement this scheme making use of the Route resource agent:
- Configure an ipsec LSB resource. - Configure a cloned Route OCF resource. - Create
an order constraint to ensure that ipsec is started before Route. - Create a collocation
constraint between the ipsec and Route resources, to make sure no instance of your
cloned Route resource is started on the tunnel endpoint itself.
Supported Parameters
OCF_RESKEY_destination=Destination network
The destination network (or host) to be configured for the route. Specify the netmask
suffix in CIDR notation (e.g. "/24"). If no suffix is given, a host route will be cre-
ated. Specify "0.0.0.0/0" or "default" if you want this resource to set the system
default route.
OCF_RESKEY_device=Outgoing network device
The outgoing network device to use for this route.
HA OCF Agents 247