Installing The Secure Gateway - Novell INTELLISYNC MOBILE SUITE 7.0 - SECURE GATEWAY ADMINISTRATOR GUIDE 04-2006 Administrator's Manual

The following table shows the default port settings. Your port settings may be
different depending on your network configuration.
Communication Protocol
HTTP
HTTPS
TCP/IP

Installing the Secure Gateway

To install and configure the Secure Gateway, follow these steps:
1. From the installation source folder, double-click the setup.exe file. The Secure
2. On the Secure Gateway Welcome screen, click Next. The Destination Folder
3. To install to a location other than the default folder, click Change. Otherwise,
4. Complete the following fields:
5. Click Next. A confirmation screen appears.
6. Click Install. The installation program installs the Secure Gateway
7. Click Finish. The Secure Gateway wizard closes.
Intellisync Mobile Suite Secure Gateway Administrator's Guide
Table 1: Default ports for communication from devices
Sync traffic
Web tunneling
Sync traffic
Web tunneling
Push traffic
Gateway Setup starts and prepares the wizard application for the installation.
screen appears.
click Next. The Secure Gateway Service User screen appears.
. Enter the name for the specified user.
Username
Password . Enter the password for the specified user.
components into the specified location. When the installation is complete, the
InstallShield Wizard Completed screen appears.
Installing Secure Gateway

Installing the Secure Gateway

Default Port
80 (configurable)
443 (configurable)
3102 (configurable)
1–4