Advertisement
Quick Links
Installation Instructions
The Lexington Mailbox Post Kit
RECOMMENDED TOOLS & SUPPLIES:
• POST HOLE DIGGER
• LEVEL
• PHILIPS HEAD POWER SCREWDRIVER
• PRESSURE TREATED 4" x 4" x 72" WOODEN POST* (Not Included)
PARTS LIST:
(2) Mounting Brackets
Steel L Bracket
Decorative Support Piece
* Actual Diameter of a Standard 4" x 4" Pressure Treated Post: 3-1/2" x 3-1/2"
PLEASE NOTE: Concrete may be needed if installing in loose soil
WARNING: "Call Before You Dig" – Dial 811.
811 is the designated "call before you dig" phone number that directly
connects you to your local One Call center. Each state has different
rules and regulations governing digging to insure that buried utility lines
will not be disturbed.
HARDWARE:
Shown at actual size
Pyramid Finial
A
C
Upper Post
Section
E
F
G
Lower Post
H
Section
B
(4) #10 – 24 x 1/2" Phillips Machine Bolts
(4) #10 – 24 Nuts
(1) 1/4 - 20 x 1" Phillips Machine Bolts
(1) 1/4 - 20 Nut
(4) #10 – 24 x 1-1/2" Phillips Machine Bolts
(4) #10 – 24 Nuts
(3) #14 x 1-1/2" Phillips Pan Head Wood Screws
(1) #14 x 3" Phillips Pan Head Wood Screw
(4) 1" Plastic Spacers
Model: PP235
D
B
Advertisement
Related Manuals for Postal Pro Lexington PP235
Summary of Contents for Postal Pro Lexington PP235
- Page 1 Installation Instructions The Lexington Mailbox Post Kit Model: PP235 RECOMMENDED TOOLS & SUPPLIES: WARNING: “Call Before You Dig” – Dial 811. • POST HOLE DIGGER 811 is the designated “call before you dig” phone number that directly • LEVEL connects you to your local One Call center. Each state has different rules and regulations governing digging to insure that buried utility lines •...
- Page 2 48" 24" Fig. 2A Fig. 2B STEP 2 Slide the Lower Post Section over the wooden post. NOTE: there is not a “front” to this section, so it does not matter what side is facing the street. Secondly, slide the Upper Fig.
- Page 3 Fig. 4 Fig. 5 STEP 4 Attach the Decorative Support Piece to the Upper Post STEP 5 Connect the Decorative Support Piece to the Steel L Bracket Component using (1) #14 x 3" Pan Head Screw in the upper hole and using (1) 1/4 - 20 x 1"...
- Page 4 (4) #10 – 24 Nuts (included in the hardware kit). (4) spacers are also included in the kit for mailboxes larger than 8" in width. The Postal Pro is a Creative Solutions, LLC Product Manufactured in Purvis, MS Fig. 8...
Need help?
Do you have a question about the Lexington PP235 and is the answer not in the manual?
Questions and answers