Managing System-Wide Integrated Login Settings - Novell CLIENT FOR LINUX 2.0 SP2 - ADMINISTRATION Administration Manual

2 Enter your username and password, then click Advanced.
3 Specify the tree, context, and server information for the server you want to connect to.
4 Click the Startup tab, then make sure Run Novell Client Login at Session Startup is selected (it
is selected by default).
5 Select Save profile after the successful login to save the Novell Login dialog settings to be used
for all subsequent session logins.
You must have the User Name and Password fields and the Tree and Context fields on the
eDirectory tab filled out for this to be saved.
IMPORTANT: An integrated login does not happen at the next session startup without a saved
profile.
6 (Optional) Click Load Profile to populate all fields in the dialog based on the saved settings.
7 (Optional) Click Clear Profile to remove the profile settings.
8 Click OK to log in to the server specified in
The next time you log in to your SUSE Linux workstation, you also automatically log into the
Novell server specified in

3.1.3 Managing System-Wide Integrated Login Settings

1 Launch the Novell Client Configuration Wizard by using either of the following methods:
Click > System Settings.
In YaST, click Network Services > Novell Client.
2 Select Login, then click Start Wizard.
3 On the Login Settings page, select or deselect Integrated Login.
This enables or disables the integrated login feature for the entire system. This is set by the
administrator and cannot be overridden by the user.
Step 3.
Step 3.
Managing Login 23