Using Openslp To Simplify Login; Setting Up Slp - Novell CLIENT FOR LINUX 1.1 Installation And Administration Manual

• Specifying (by node address) which workstations users can log in on
• Restricting the times when users can log in (you can assign all users the same hours or you can
For specific information on setting these restrictions, see the online help located in Novell iManager.

4.3 Using OpenSLP to Simplify Login

The service location protocol (SLP) was developed so that networking applications such as the
Novell Client for Linux could discover the existence, location, and configuration of networked
services in enterprise networks. Without SLP, users must supply the hostname or network address of
the service that they want to access.
Because SLP makes the existence, location, and configuration of certain services known to all
clients in the local network, the Novell Client for Linux can use the information distributed to
simplify login. In the case of the Novell Client, having SLP set up allows users to see the trees,
contexts, and servers available to them when they use the Novell Client for Linux Login screen.
When they click the Browse button, a list of available trees, contexts, or servers appears and they
can select the appropriate ones. For example, instead of remembering an IP address or DNS name
for a server, users can select the server's name from a list of available servers.
SLP must be activated and set up on your Novell servers in order for the Novell Client to take
advantage of it. For more information, see
Enterprise Server 9 Administration Guide (http://www.novell.com/documentation/oes/
index.html?page=/documentation/oes/sles_admin/data/sec-net-slp.html#sec-net-slp).
SLP is not set up by default on Linux workstations. The Novell Client for Linux includes a Novell
Client Configuration Wizard to simplify the process of configuring your SLP and other Novell
Client configuration options. The Novell Client Configuration Wizard provides only basic SLP
configuration because this is all that is required by the client. However, if other applications on your
workstation require more advanced settings, you can modify the /etc/slp.conf file to set
advanced settings.
For more information on advanced SLP configuration, see the
www.openslp.org). In addition, the /usr/share/doc/packages/openslp directory
contains documentation on SLP, including a README.SuSE file containing the SUSE
details, several RFCs, and two introductory HTML documents (An Introduction to SLP and
OpenSLP User's Guide). RFC 2609 details the syntax of the service URLs used and RFC 2610
details DHCP via SLP.

4.3.1 Setting Up SLP

1 Launch the Novell Client Configuration Wizard using either of the following methods:
2 Select Service Location Protocol (OpenSLP), then click Start Wizard.
3 Specify the following SLP information for your network:
28 Novell Client 1.1 for Linux Installation and Administration Guide
restrict users individually)
• In the Novell Client tray application, click System Settings.
• In YaST, click Network Services > Novell Client.
• Scope List: Specify the scopes a user agent (UA) or service agent (SA) is allowed when
making requests or registering, or the scopes a directory agent (DA) must support.
"SLP Services in the Network" in the SUSE LINUX
OpenSLP Web site (http://
®
LINUX