Software Dependency Conflicts On Linux; Drive Mappings To Netware Mapped Volumes Missing After Install; Limited Support For Mixed Netware And Linux Clusters - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 - README 9-21-2010 Installation Manual

To install the new plug-ins:
1 Go to the
index.jsp?product_id=&search=Search&build_type=SDBuildBean&families=2611&version=
&date_range=&keywords=&x=32&y=7)
2 In iManager, click the Configure button, select Module Installation, select Available Novell
Plug-in Modules, then click New.
3 Browse to the directory where you downloaded the plug-ins and add the storage management
(
storagemgmt.npm
4 Repeat
(
ncsmgmt.npm
5 Select the Storage Management plug-in (
Close on the message screen with the text informing you to restart your Web server.
6 Click Available Plug-ins and then repeat
the Novell Cluster Services plug-in (
The plug-ins must be installed in the following order:
1.
storagemgmt.npm
2.
nssmgmt.npm
3.
ncsmgmt.npm
7 Restart the Apache Web server.
One way to do this is by restarting your server.

3.4 Software Dependency Conflicts on Linux

During the installation and uninstallation processes, a message might appear stating that requisite
software is not installed and asking you if you want to resolve conflicts. Click Yes, and then on the
Dependency Conflict screen, select Do Not Delete novell-cluster-services-cli, click OK -- Try Again,
and then Accept.
You might also encounter software dependency conflicts unrelated to Novell Business Continuity
Clustering or Novell Cluster Services
case basis.
3.5 Drive Mappings to NetWare Mapped Volumes Missing After
Install
The drive mappings to all NetWare mapped volumes are removed if you enter invalid credentials for
administrator/password in the BCC install wizard.

3.6 Limited Support for Mixed NetWare and Linux Clusters

Clusters containing NetWare and Linux* nodes are only supported in a BCC as a temporary means
to convert a cluster from NetWare to Linux. Part of the temporary conversion state includes a
restriction that only one mixed cluster can exist in your BCC. For example, Cluster A can have both
NetWare and Linux nodes, but Cluster B cannot. All nodes in Cluster B must be either NetWare or
Linux.
4 Novell Business Continuity Clustering 1.1 SP1 Readme
iManager plug-in download site (http://download.novell.com/
) plug-in by selecting it, clicking Open, and then clicking OK.
Step 3 to add the NSS plug-in (
).
and download the iManager plug-ins to a directory.
) and the Novell Cluster Services plug-ins
nssmgmt.npm
storagemgmt.npm
Step 5 for both the NSS plug-in (
).
ncsmgmt.npm
TM software. You should resolve these conflicts on a case-by-
), click Install, and then click
nssmgmt.npm
) and