Advertisement
Quick Links
SP-35 series
Airbrush Parts
3
2
1
1-1
INDEX
DESCRIPTION
1
Needle cap
1-1
Extra crown-shape needle cap
2
Nozzle cap
3
Nozzle (0.35mm)
Body
4
5
Piston
6
Push button
8
O-ring for needle guide
9
Needle guide
SP-35/ SP-35f
with cut-off handle, can pull on
needle directly via needle
chucking nut to remove clog.
17
6
5
4
INDEX
11
12
13
14
17
19
20
21
21-1
SP-35b
with basic handle, fully protects
the needle.
9
8
19
20
21
24
21-1
DESCRIPTION
Needle chucking guide
Spring
Spring case
Brush
2cc cup cover
Piston o-ring
Air valve o-ring
Air valve
Extra single action air valve set
www.SPARMAXair.com
12
11
26
25
INDEX
24
Wrench
25
Needle
26
Needle chucking nut
27
Handle
SP-35c
with preset handle, limit travel
distance of needle to preset max.
color flow for consistent lines.
13
27
14
DESCRIPTION
Advertisement
Related Manuals for Sparmax SP-35 Series
Summary of Contents for Sparmax SP-35 Series
- Page 1 SP-35 series www.SPARMAXair.com Airbrush Parts 21-1 INDEX DESCRIPTION INDEX DESCRIPTION INDEX DESCRIPTION Needle cap Needle chucking guide Wrench Extra crown-shape needle cap Spring Needle Nozzle cap Spring case Needle chucking nut Nozzle (0.35mm) Brush Handle Body 2cc cup cover Piston...
- Page 2 WARNING: DO NOT remove the nozzle. CAUTION: DO NOT allow paints to sit idle in the cup. CAUTION: Use ONLY airbrush paints and proper airbrush cleaner/thinner. SET UP & OPERATION 1. Connect 1/8” PS end of hose to the airbrush, the other end to the compressor. 2.
- Page 3 4) Pressure too low -> increase pressure. WARRANTY Each SPARMAX airbrush is test sprayed and fully inspected to ensure its quality and performance. Warranted for TWO years from date of factory dispatch against workmanship or material defect resulting in inoperable airbrush. Exclude parts subject to wear such as needles, nozzles, o-rings, and damage or loss caused by improper use, unauthorized alteration and negligence.
- Page 4 SUGGESTED ACCESSORIES 1. Dual head airbrush tool Replace nozzle with this tool to eliminate overtightening during assembly which damage the nozzle. Include additional function of converting dual action air valve into single action. 2. Cleaning pot Handy tool for airbrush cleaning without creating a mess in the air. Also include airbrush holder and plastic container for protection which can store small items later on.
- Page 5 This involves moving the arm but not the wrist. Repeat and practice in different directions horizontally, and vertically downwards. Copyright © 2021 Anest Iwata Sparmax Co., Ltd. All rights reserved. 3511025D Detailed_SP-35_series_manual_20210428...
Need help?
Do you have a question about the SP-35 Series and is the answer not in the manual?
Questions and answers