Casio F108WH Series Operation Manual

MA1006-EA
About This Manual
General Guide
•
Press B to change from mode to mode.
•
After you perform an operation in any mode, pressing
Mode.
Timekeeping Mode
Timekeeping
PM indicator
Day of week
Day
Hour : Minutes Seconds
•
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with
indicator.
Alarm
Alarm on indicator
Hourly time signal
on indicator
Alarm time
(Hour : Minutes)
Mode indicator
2. Press C to change the selection in the following sequence.
Hour
3. Press A to increase the selected digits. Holding down A changes the number at
high speed.
•
The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon (PM).
4. After you set the alarm time, use
•
If you do not operate any button for one or two minutes while a selection is flashing,
the flashing stops and the watch goes back to the Timekeeping Mode automatically.
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press A while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
Both on
To test the alarm
Hold down A while in the Alarm Mode to sound the alarm.
Operation Guide 3224
•
Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•
Button operations are indicated using the letters shown
in the illustration.
•
Each section of this manual provides you with the
information you need to perform operations in each
mode.
•
Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
B returns to the Timekeeping
Alarm Mode
Press B.
Use the Timekeeping Mode to view the current time and
date.
•
Day of the week is displayed as follows.
SU : Sunday MO : Monday
TU : Tuesday WE : Wednesday
TH : Thursday FR : Friday
SA : Saturday
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press A to switch between the
12-hour and 24-hour formats.
• With the 12-hour format, the PM indicator appears for
times in the range of noon to 11:59 p.m. and no indicator
appears for times in the range of midnight to 11:59 a.m.
When the Daily Alarm is turned on, the alarm sounds for
20 seconds at the preset time each day. When the Hourly
Time Signal is turned on, the watch beeps every hour on
the hour.
•
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing B.
To set the alarm time
1. In the Alarm Mode, press C. The hour digits flash
because they are selected.
•
This operation automatically turns on the alarm.
Minutes
Normal Alarm Mode (No digit flashes)
C to return to the Alarm Mode.
Both off Daily Alarm only Hourly Time
Signal only
•
The watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for one or two minutes in the Alarm Mode and Time Setting Mode.
•
In any mode, press C to illuminate the display.
Stopwatch Mode
Stopwatch
Mode indicator
Minutes
Seconds
1/100 second
To measure times with the stopwatch
(a) Elapsed time measurement
24H
A A
Start Stop
(b) Split time measurement
A C
Start Split
(SPL displayed)
(c) Split time and 1st-2nd place times
A C
Start Split
First runner
finishes.
Display time of
first runner.
Time Setting
PM indicator
Day of week
Day
Hour : Minutes Seconds
3. While the second's digits are selected (flashing), press
. If you press A while the second's count is in the range of 30 to 59, the seconds
are reset to and 1 is added to the minutes. If the second's count is in the range of
00 to 29, the minute's count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press
increase the number. While the day of the week is selected, pressing A advances
to the next day. Holding down A changes the current selection at high speed.
5. After you set the time and date, press
•
If you do not operate any button for one or two minutes while a selection is flashing,
the flashing stops and the watch goes back to the Timekeeping Mode automatically.
Time Setting Mode
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is
59 minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
•
The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
•
Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
•
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B.
A A C
Re-start Stop
C A C
Split release Stop
A C C
Stop Split release
Second runner Display time of
finishes. second runner.
Use the Time Setting Mode to set the current time and
date.
To set the time and date
1. Use B to enter the Time Setting Mode.
•
The second's digits flash because they are selected.
2. Press C to change the selection in the following
sequence.
Seconds Hour
Day of
Day
the Week
A to reset the seconds to
B to return to the Timekeeping Mode.
Clear
Clear
Clear
Minutes
Month
A to
1