Download Print this page

AIWO AW-C-281 User Manual

Pet wireless water dispenser 2nd generation

Advertisement

Quick Links

Pet Wireless Water Dispenser 2nd Generation
U s e r
M a n u a l
Please read the instructions carefully before using the product and keep it properly.
AW-C-281

Advertisement

loading
Need help?

Need help?

Do you have a question about the AW-C-281 and is the answer not in the manual?

Questions and answers

Summary of Contents for AIWO AW-C-281

  • Page 1 Pet Wireless Water Dispenser 2nd Generation U s e r M a n u a l Please read the instructions carefully before using the product and keep it properly. AW-C-281...
  • Page 2 Notice to Customers · Thank you for choosing Aiwo wireless water dispenser. Aiwo is committed to using technology to create a better life for your pet. · Please read this product manual carefully before use. Once installed or used, it means that you have read it carefully and accept the following safety instructions ·...
  • Page 3 Product Introduction � � � � � � � � � �� 1.Water Tray 2.Filter tray (built-in filter) 3.water pump set 4.Water tank 5.Induction detection 6.Type-c charging port 7.Charging indication/low battery indication 8.Induction water mode 9.Power button 10.Intermittent water discharge mode...
  • Page 4 Instructions Installation Instructions 1.Remove the water tray and take out the accessories in the bucket 2.Turn over the water tray and remove the filter element. Soak the removed filter element in clean water for more than five minutes and then install the filter element again Rinse the bucket and water tray with clean water;...
  • Page 5 4. Install the water pump set; �.Add pet drinking water to the water tank and cover the water tray after filling; Notice: To prevent drinking water from overflowing, just add drinking water to the maximum water level line.
  • Page 6 �.Aim the controller at the water tank and press it along the track of the water tank; As shown below:...
  • Page 7 Function Introduction Power button Induction water mode Intermittent water Charging indication/low discharge mode battery indication Power button: long press to turn on and off, the default mode is induction mode, short press to switch to induction/geyser mode. Induction water discharge mode - green light on: When a pet is sensed within a range of 1.5M or less, the water discharge function will be turned on and the 30S stop function will be turned on when the pet is active.
  • Page 8 Problem Question Solution Before first use, please soak the filter in Water keeps overflowing the water tray. The filter a clean bowl (not water tank) for more element is not fully soakeds. than 5 minutes. The water level is low and needs to be There are bubbles in the water.
  • Page 9 Product cleaning The controller is not washable (pictured). Rinse the water tray and wate tank and then dry them or wipe the product dry. Cleaning cycle · Before first use, please clean the water tank and filter accessories · The frequency of cleaning the water tank depends on the pet's behavior and water quality.