Decibullz P1-BLU Instructions Manual

CUSTOM MOLDED
EARPLUG
INSTRUCTIONS
IMPROPER FITTING OR MISUSE WILL REDUCE EFFECTIVENESS OF
EARPLUGS AND COULD RESULT IN HEARING LOSS OR INJURY
Test thoroughly in progressively louder environments. Wear hearing
protection at all times that you are exposed to loud noise. Do not
enter a loud environment right away. Start in a quiet, low noise
environment and slowly increase your noise exposure to make sure
your earplugs are providing adequate protection. If at any time you
feel your hearing protection is not providing adequate protection,
remove yourself from the loud environment immediately. DO NOT
PLACE THE HOT MOLD INTO YOUR EAR! Wait until the mold is warm
and pliable before inserting it into the ear.
Remove all piercings from the ear bowl or concha before molding.
Check that the silicone and/or foam ear-canal tips are securely
attached to custom earpiece before every use. Remove the earpieces/
earplugs slowly and gradually break the seal. Rapid removal may
damage the eardrum. Use only as directed. If misused (by failure
to use as directed), ear canal tip may become lodged in ear, which
requires removal by an Ear, Nose and Throat Doctor ONLY.
CAUTION: CHOKING HAZARD
Keep away from children. Parts are nontoxic but may
interfere with breathing if caught in windpipe.
WARNING!
CAUTION:
PLG1-INST 2019-Nov