Samsung M310 - SGH Cell Phone 4 MB User Manual page 70

➔
Button) Tools & Settings
press .
Select Choice lists and press
2.
Select Automatic or Always off and press
3.
Sensitivity
This option allows you to adjust the sensitivity levels
for voice commands.
From the Main screen, press Menu (Left Option
1.
➔
Button) Tools & Settings
press .
Select Sensitivity and press
2.
Select Reject the most, Recommended, or Reject
3.
the least and press
Train mode
If VoiceSignal does not recognize your voice
commands, you can use the train mode to improve
the accuracy of digit recognition. Train mode ensures
that your phone recognizes only your voice. Other
users may not use your voice software unless you
reset the phone to the factory defaults.
Training the phone to recognize your voice takes
approximately three minutes and you should use a
quiet room while saying each word or digit needed to
train the phone.
From the Main screen, press Menu (Left Option
1.
➔
Button) Tools & Settings
press .
67
➔
Voice service and
.
.
➔
Voice service and
.
.
➔
Voice service and
Select Train mode and press
2.
Select Adapt voice and press
3.
Press the OK (Left Option Button) after reading
4.
the dialog.
Say the word or digit displayed on the phone
5.
and continue until all the words or digits are
spoken.
To reset the voice software to factor reset values:
From the Main screen, press Menu (Left Option
1.
➔
Button) Tools & Settings
press .
Select Train mode and press
2.
Select Reset voice and press
3.
Press the OK (Left Option Button) to reset
4.
adaptation.
Important!: When you reset adaptation you lose any new words
you added to VoiceMode.
Sound
This options allows you to determine which prompts,
digits or names are spoken through the speaker or
headset.
To set the Sound options:
From the Main screen, press Menu (Left Option
1.
➔
Button) Tools & Settings
press .
.
.
➔
Voice service and
.
.
➔
Voice service and