Advertisement
Quick Links
User's manual
Customer Service
US:1-800-645-2986
Auto Stand-On Floor Scrubber, 24" Cleaning Path
Read all instructions carefully before attempting to assembling, operating or maintaining this floor scrubber. Protect yourself and
others by observing all safety information. Failure to comply with instructions could result in personal injury and / or property
Safety and Usage Guidelines
• Before use, check the power supply specifications on the nameplate and ensure they match the product's requirements.
• DO NOT operate any parts beyond their rated load capacity.
• DO NOT use the machine in extreme environments, including highly acidic, alkaline, excessively hot, or cold conditions.
• DO NOT modify this floor scrubber.
Global Industrial is not responsible for any damage, accidents, or injuries as a result from not following these guidelines; and
warranty will be voided.
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Model: 641860
damage, and will void warranty. Save instructions for future reference.
- 1 -
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
Advertisement
Related Manuals for Global Industrial 641860
Summary of Contents for Global Industrial 641860
- Page 1 • DO NOT use the machine in extreme environments, including highly acidic, alkaline, excessively hot, or cold conditions. • DO NOT modify this floor scrubber. Global Industrial is not responsible for any damage, accidents, or injuries as a result from not following these guidelines; and warranty will be voided.
- Page 2 Auto Stand-On Floor Scrubber Machine Delivery Inspection Upon receiving the machine, immediately verify that all received items match the packing list. Carefully inspect for any damage sustained during transportation. In case of damage, document the type and quantity and contact our after-sales service department promptly.
- Page 3 • DO NOT operate the machine on slopes exceeding its allowable limit to prevent instability. • When parking the scrubber, remove the key and ensure it is on level ground. • If the machine malfunctions, refer to the troubleshooting section of this manual. If the issue persists, contact Global Industrial Technical Service for support.
- Page 4 Auto Stand-On Floor Scrubber Control Panel R – Increase Water S – Decrease Water T – Headlight U – Horn V – Display Screen W – Brush / Vacuum X – ECO Mode Y – Forward Z – Reverse AA – Power Display Screen Settings - Data Display Interface •...
- Page 5 Auto Stand-On Floor Scrubber Battery Type and Maintenance For optimal performance, use only with Global Industrial-approved sealed batteries - four sets of 6V - 220AH batteries. Battery charging and maintenance must strictly follow these instructions. The battery charger must match the battery type and capacity.
- Page 6 • The maximum capacity of the solution tank is approximately 48 gallons. • Add liquid detergent in accordance with the Global Industrial's recommended concentration. • To prevent excessive foam (which can damage the suction motor), use only the minimum necessary amount of detergent.
- Page 7 Auto Stand-On Floor Scrubber Head Assembly For packaging purposes, the head assembly is shipped separately from the machine. Therefore, it must be installed during initial assembly. Follow these steps: 1. Turn the key switch (AA) to the “0” (OFF) position. 2.
- Page 8 Auto Stand-On Floor Scrubber ⚠ WARNING: • Always wear protective gloves to prevent hand injuries. • Turn off power before installation to avoid injury. • Ensure no people or objects are near the cleaning brush while performing this operation. • Verify that the cleaning brush is installed correctly to prevent irregular machine movement. Maintenance Tip: •...
- Page 9 Auto Stand-On Floor Scrubber Shutting Down the Machine At the end of operation and before performing any maintenance, follow these steps: 1. Press the brush / vacuum switch (W) to raise the head assembly. The suction motor will turn off after a few seconds. 2.
- Page 10 Auto Stand-On Floor Scrubber Routine Maintenance Cleaning the Brushes 1. Ensure the main switch is in the (OFF) position. 2. Turn the head lifting handle counterclockwise to raise the head. 3. Remove the cleaning brush. ⚠ WARNING: Ensure that no one is near the cleaning brush during this process. 4.
Need help?
Do you have a question about the 641860 and is the answer not in the manual?
Questions and answers