Registering Xm Satellite Radio Channels - Yamaha RXV765 - RX AV Receiver Owner's Manual

Registering XM Satellite Radio
channels
You can use this feature to store up to 40 XM Satellite
Radio channels. You can call any preset channel just by
selecting a preset number as described in "Calling a preset
channel (Preset Search mode)" on this page.
Registering preset channels
1
Search for a channel you want to set as a
preset channel in one of the XM Satellite
Radio search modes.
For details, see "XM Satellite Radio operations"
(see page 34).
XM
008 80's
2
Press GMEMORY (or fMEMORY).
The front panel display changes as follows.
Currently registered channel
(or "---" if empty)
XM
P01:--- << 008
Preset number
y
• To register the selected channel under an empty preset number
automatically, press and hold GMEMORY (or fMEMORY)
for more than 2 seconds instead of doing step 2. In this case, steps
3 and 4 are unnecessary.
• To cancel the preset operation, press kRETURN.
3
Press HPRESET l / h (or fPRESET k /
n) to select the preset number.
Note
• You can also select a preset number by pressing the mNumeric
keys.
4
Press GMEMORY (or fMEMORY).
The channel is registered to the selected preset
number.
Channel to be registered to the
selected preset number
XM ® Satellite Radio tuning (U.S.A. model only)
Calling a preset channel (Preset Search
mode)
Prior to selecting a preset number in Preset Search mode,
you must register an XM Satellite Radio channel to the
preset number. For details, see "Registering preset
channels" on this page.
Preset number
XM
008 80's
Press HPRESET l / h (or fPRESET k / n)
repeatedly to change preset numbers (1 to 40).
y
• You can directly enter the preset number using the mNumeric keys
instead of selecting it using HPRESET l / h (or fPRESET k /
n).
Clearing preset channels
You can clear the assignments of preset XM Satellite
Radio channels.
1
Press rOPTION on the remote control.
The OPTION menu is displayed on the front panel
display.
2
Press kCursor n repeatedly to select "Clear
Preset" and then press kENTER.
3
Press kCursor k / n to select the preset
channel that you want to clear.
XM
008 80's
4
Press kENTER to execute the clearing of
the selected preset channel.
To clear the registration of multiple preset channels,
repeat the above steps. To end the operation, press
rOPTION.
35
En