Motorola CLIQ User Manual page 40

Bluetooth® handsfree devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Refer to the guide that came with the device for
details.
Settings
2 Press Menu >
Bluetooth settings
>
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(like ) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
After you connect:
• To reconnect with a device, simply turn on the
device or touch the device name in the
devices
list.
38 Wireless
Wireless & networks
>
.
Scan for devices
.
, or enter the device passkey
Bluetooth
• To disconnect a device, simply turn off the device,
or touch the device name in the devices list and
Disconnect
press Menu >
• To extend battery life, turn off Bluetooth power
when not in use: Press Menu
Wireless & networks
Bluetooth toggle
Tip: To add a
widget, touch and hold a blank spot
on your home screen and then
Motorola widgets
touch
Note: Your phone's Bluetooth features and Bluetooth
Class 1 power levels are not allowed for outdoor
operation in France. To avoid unlawful interference
with radio signals, do not use the Bluetooth features in
France unless you are indoors.
Wi-Fi® networks
To connect a network in your range:
Settings
1 Press Menu >
Wi-Fi settings
> .
Wi-Fi
2 Touch to turn on and scan. If Wi-Fi is already
on, press Menu
networks it finds within range.
Tip: To show your phone's MAC address or other
Wi-Fi details, press Menu
.
Settings
>
Bluetooth
>
.
Wireless & networks
>
Scan
> . Your phone lists the
Advanced
> .
>