Summary of Contents for uhlmann & zacher CX2132
- Page 1 CX2132 Clex private wall mounted reader Only for versions with 2.4 GHz Bluetooth ® Low Energy Operating and assembly instructions...
- Page 2 CX2132 ABLE OF CONTENTS Legal Notice Operating and assembly instructions (original language) Clex private wall mounted reader CX21322132 (Instructions only for version with 2.4 GHz Bluetooth ® Low Energy) Document number: Version: 1.5 As per: 02.08.2022 Manufacturer Uhlmann & Zacher GmbH Gutenbergstraße 2–4...
-
Page 3: Table Of Contents
CX2132 ABLE OF CONTENTS Table of contents About this document ................ 3 Warnings .................... 3 Symbols ....................3 Safety .................... 4 Proper use ..................4 Improper use ..................4 General safety information and warnings ..........4 Product description ................6 Functional description ................ -
Page 4: About This Document
About this document These operating and assembly instructions describe the Clex private wall mounted reader (in short: CX2132). They are part of the product and contain important information necessary for correct operation and maintenance. These instructions are only for versions with 2.4 GHz Bluetooth Low Energy. -
Page 5: Safety
Safety Proper use The CX2132 wall mounted reader is used to switch potential-free contacts (e.g. for electric door openers, electric locks, electric door and gate drives, elevators) by means of a contactless key held in front (passive transponder) or by actuating an active transponder. - Page 6 CX2132 AFETY No liability is accepted for incorrectly programmed units. Uhlmann & Zacher GmbH accepts no liability for malfunctions, such as impossible access to in- jured persons, damage to property or other damage. Uhlmann & Zacher accepts no liability for damage to the door or compo-...
-
Page 7: Product Description
The wall mounted reader is supplied with power via an external energy source. Different transponder carriers can be used as keys on the CX2132, such as an ISO card or key fob. The CX2132 has the following system features: ... -
Page 8: Layout And Scope Of Delivery
CX2132 RODUCT DESCRIPTION Layout and scope of delivery Dimensions in mm: Dimensions without housing The other dimensions and the scope of delivery depend on the selected version: Scope of delivery: Wall mount- Cover Gira S-Color Surface-mounted housing ed reader or Gira TX-44... - Page 9 CX2132 RODUCT DESCRIPTION Dimensions Version Gira S-Color (dimensions in mm): Versions Dimensions of housing: Surface-mounted version Flush-mounted version Gira S-Color Gira S-Color...
- Page 10 CX2132 RODUCT DESCRIPTION Version Gira TX-44: Dimensions of housing:...
-
Page 11: Technical Data
CX2132 RODUCT DESCRIPTION Technical data General technical data Designation Value Product designation Clex private wall mounted reader Product number CX2132 Transponder versions MIFARE 13.56 MHz (2.4 GHz Bluetooth Low Energy): ® ® taken into considera- MIFARE Classic ® , MIFARE ®... -
Page 12: Connection And Assembly
CX2132 ONNECTION AND ASSEMBLY Connection and assembly Preparing installation The electrical installation for the wall mounted reader must be carried out in ac- cordance with the connection diagrams and technical data of the devices to be controlled. The connection diagram and the technical data of the wall mounted... -
Page 13: Connection
CX2132 ONNECTION AND ASSEMBLY Connection Discharge any static electricity from your body before touching the electronic components in the wall mounted reader, e.g. by touching a grounded unpainted metal surface. If necessary, remove the screw terminals attached to the PCB vertically up- wards by hand. - Page 14 CX2132 ONNECTION AND ASSEMBLY Pin assignment ver- sions BLE CX2132 – BLE version Contact number Assignment 1 + 2 Power supply (any polarity) 3 + 4 Manipulation switch (any polarity) Relay K3, NO contact 5 + 6 (if equipped, any polarity)
-
Page 15: Installation
CX2132 ONNECTION AND ASSEMBLY Installation Guide wall mounted reader into housing or flush-mounted box. Make sure that no cables are pinched or crushed. Gira S-Color Flush-mounted box housing Align wall mounted reader in housing or flush-mounted box and then screw ... - Page 16 CX2132 ONNECTION AND ASSEMBLY Fasten the cover in the correct position, depending on the version. Gira S-Color Flush-mounted box housing Gira TX-44 Flush-mounted box...
-
Page 17: Commissioning
CX2132 OMMISSIONING Commissioning Management accessories 5.1.1 CX2530 Keyng The CX2530 Keyng management software enables the Clex private electronic locking system to be managed conveniently from a PC. The software offers an extended range of functions compared to the Learning/Clearing system. -
Page 18: Management With Keyng Cx2530
CX2132 OMMISSIONING Optionally, teach-in additional keys as in the previous step. Hold the service key in front of the reading unit er or wait 15 seconds to exit programming mode. To create a key with toggle authorization, hold the key in front of the reading unit for 3 seconds during teach-in until success is signaled by 3 short tones. -
Page 19: Operation
CX2132 PERATION Operation Operation with IDs authorized for locking e.g.: Transponder card Transponder fob Transponder key Switching briefly Hold an authorized ID in the center in front of the wall mounted reader An optical/acoustic signal indicates that the wall mounted reader has switched. -
Page 20: Signaling
CX2132 PERATION Signaling Function Signal (acoustic and optical) and explanation Sleep mode LED flashes red Programming ▬ ● mode start Long tone followed by a short tone ● ▬ Programming mode end Short tone followed by a long tone ● ●... -
Page 21: Malfunctions During Operation
CX2132 ALFUNCTIONS DURING OPERATION Malfunctions during operation Malfunctions during operation are signaled with the following error messages: Function Acoustic signal Explanation Memory/configuration 5 long tones ▬ ▬ ▬ ▬ ▬ ● error 1 short tone Coupling error 5 long tones ▬... -
Page 22: Cleaning And Disposal
CX2132 LEANING AND DISPOSAL Cleaning and disposal Cleaning Clean wall mounted readers using only standard household cleaners and a damp cloth Do not use abrasive or corrosive cleaning agents Disposal Do not dispose of the wall mounted reader with household waste, but at a ... -
Page 23: Glossary
CX2132 LOSSARY Glossary Term Explanation Intruder detection system Keyng Software for Windows handheld computers for managing a locking system MIFARE ® Technology for contactless transmission of identification data Data carrier that contains the authorization information. This can be, for example, an ISO card or a chip. The key is sometimes also called a transponder.
Need help?
Do you have a question about the CX2132 and is the answer not in the manual?
Questions and answers