Yamaha DTX-3000 Quick Connect Manual

Quick-Connect Guide
DTX-3000
Home Theater in a Box
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to connect the speakers first. Then connect your Receiver,
DVD Player and other components. Refer to your Owner's Manuals as well as those that came with your other
components for complete instructions and precautions. Be sure that all components are not plugged in while
making connections. You will need the following which are not included in the package: Phillips screwdriver,
wire cutter/stripper. Brackets, toggle bolts, molly anchor screws or sheet metal screws are optional.
1
Your

System
  
Inspect Contents After unpacking, inspect the contents to confirm you have the above items:
speakers, three surround speakers, one center speaker,
 
remote control, DV-C6660 DVD Player with remote control,

optical cable, non-skid pads, screws,
  
AM and FM antennas and three related Owner's Manuals.
3
Connect Center
Speaker Wire
7
9

powered subwoofer, HTR-5740 A/V Receiver with
 
speaker wire, RCA cable, audio/video RCA cable,
  
support bases, and fasteners. Also included, but not shown, are
 
4
Attach Bottom Pads Apply pads
speaker stand as shown.
8
Connect
Front and
Surround
Speaker
Wire Positive
(+) side of the
wire with white
stripe attaches
to (+) terminal.
Negative (-)
side attaches to
(-) terminal.

home theater

2
Room
Layout
two front
5
Thread Speaker Wire Pass the
speaker wire through the underside of
speaker stand.
11
to bottom of

Subwoofer
Connection
Connect RCA Cable Connect RCA cable
to subwoofer . Set subwoofer VOLUME control
to half-way mark and POWER to OFF. Connect
RCA cable to receiver from subwoofer.
WARNING
in while connecting them.
YHT YHT
Speaker Placement After connection of the speakers place them so they appear in the
approximate positions as shown in the diagram above.

Antenna Connection

13

Connect Antennas to Receiver Locate AM
loop antenna and indoor FM antenna. Keeping
receiver unplugged, connect as shown. For more
information about obtaining clear reception and
Components must not be plugged
grounding, see your Owner's Manual.
AM Loop Antenna
Indoor
FM Antenna