Using The Configuration Utility For Windows 98Se/Me/2000/Xp; Overview; Access The Configuration Utility - Hawking WIRELESS-G CARDBUS PC CARD - GUIDE D User Manual

5. Using the Configuration Utility for
98SE/ME/2000/XP

5.1 Overview

The wireless Configuration Utility can be used to check link information, search for available
wireless networks, or to create profiles that hold different configuration settings.

5.2 Access the Configuration Utility

Before using the Configuration Utility, go to Start menu at the left-bottom side of the desktop, then
select Programs > Ralink > RT2500 > CCS, the Country Channel Select window appears.
(Fig 5-0) Then select the country Region and click OK.
Fig 5-0
The Configuration Utility icon will appear in your system tray. Double-click the icon. (Fig 5-1)
Fig 5-1
The utility is divided into six parts: Profile, Link Status, Site Survey, Statistics, Advance, and
About. You should change all your configuration settings for your Wireless-G CardBus PC Card
by using this utility and not with the Network Properties section in your Control Panel.
Note: In Windows XP, you should disable the Wireless Zero Configuration service following the
steps below:
A. Right Click My Computer on the desktop and select Manage. (Fig 5-2).