Summary of Contents for FASANO TOOLS FGA 340
- Page 1 5 mm AIR RANDOM ORBITAL SANDER FGA 340 The reproduction of this document (even in partial form) is prohibited without the Fasangas S.r.l. authorization...
- Page 2 CONTENT 1 GENERAL WARNINGS 2 TECHNICAL FEATURES OF THE TOOL 3 IMPORTANT SAFETY INSTRUCTIONS 4 INSTRUCTIONS FOR THE USE OF THE TOOL 5 MAINTENANCE 6 TROUBLESHOOTING 7 DISPOSAL INFORMATIONS 8 EC DECLARATION OF CONFORMITY 9 WARRANTY...
- Page 3 2. TECHNICAL FEATURES OF THE TOOLS MODEL: FGA 340 TYPE: Air random orbital sander WEIGHT: 0.9 kg (2 lb) 152 mm (6’’)
- Page 4 3. IMPORTANT SAFETY INSTRUCTIONS When using this air tool, the following basic safety precautions should always be followed to reduce the risk to personal injury: Always wear safety glasses with side shields in accordance with applicable regulations. Air powered equipment are capable of propelling materials such as metal chips, saw dust and other debris at high speed, which could result in serious eye injury.
- Page 5 4. INSTRUCTIONS FOR USE OF THE TOOL AIR LINE: Use a 3/8’’ air hose between the compressor and the tool. Compressed air is cooled and its water content separated, as soon as the air leaves the compressor. A portion of the water content, however, is condensed in the piping, and can enter the tool mechanism, and may cause trouble.
- Page 6 user manual). You can adjusting the running speed by raising or lowering the lever. g) To operate this tool, just push the lever placed on the body of the tool. h) The tool stops running as lever is released. When job is complete, turn the air compressor off and store as described in the air compressor operator manual.
- Page 7 6. TROUBLESHOOTING WARNING ALWAYS DISCONNECT AIR SUPPLY BEFORE PERFORMING ANY WORK ON THE TOOL. If the tool does not start: • make sure that in the compressed air circuit there is really pressure; • check that all the valves are opened; •...
- Page 8 This warranty doesn’t cover expandable items such as batteries or fuses. If the defect has been caused by a misuse or abnormal operating conditions, the repair will be billed to the customer at a nominal cost. Code: FGA 340 REV.3 06.2023...
- Page 9 Product code: FGA 340 rev.2024.02.29 REF. SPARE PART CODE SPARE PART DESCRIPTION Q.TY FOR EACH TOOL FGA 340-01 SNAP RING FGA 340-03A VALVE STEM SET FGA 340-05A REGULATOR SET FGA 340-04A FGA 340-07A VALVE SET FGA 340-06A AIR INLET FGA 340-43A...
- Page 10 This warranty doesn’t cover expandable items such as batteries or fuses. If the defect has been caused by a misuse or abnormal operating conditions, the repair will be billed to the customer at a nominal cost. Code: FGA 340 REV.3 06.2023...
- Page 11 6. TROUBLESHOOTING WARNING ALWAYS DISCONNECT AIR SUPPLY BEFORE PERFORMING ANY WORK ON THE TOOL. If the tool does not start: • make sure that in the compressed air circuit there is really pressure; • check that all the valves are opened; •...
- Page 12 user manual). You can adjusting the running speed by raising or lowering the lever. g) To operate this tool, just push the lever placed on the body of the tool. h) The tool stops running as lever is released. When job is complete, turn the air compressor off and store as described in the air compressor operator manual.
- Page 13 4. INSTRUCTIONS FOR USE OF THE TOOL AIR LINE: Use a 3/8’’ air hose between the compressor and the tool. Compressed air is cooled and its water content separated, as soon as the air leaves the compressor. A portion of the water content, however, is condensed in the piping, and can enter the tool mechanism, and may cause trouble.
- Page 14 3. IMPORTANT SAFETY INSTRUCTIONS When using this air tool, the following basic safety precautions should always be followed to reduce the risk to personal injury: Always wear safety glasses with side shields in accordance with applicable regulations. Air powered equipment are capable of propelling materials such as metal chips, saw dust and other debris at high speed, which could result in serious eye injury.
- Page 15 2. TECHNICAL FEATURES OF THE TOOLS MODEL: FGA 340 TYPE: Air random orbital sander WEIGHT: 0.9 kg (2 lb) 152 mm (6’’)
- Page 16 CONTENT 1 GENERAL WARNINGS 2 TECHNICAL FEATURES OF THE TOOL 3 IMPORTANT SAFETY INSTRUCTIONS 4 INSTRUCTIONS FOR THE USE OF THE TOOL 5 MAINTENANCE 6 TROUBLESHOOTING 7 DISPOSAL INFORMATIONS 8 EC DECLARATION OF CONFORMITY 9 WARRANTY...
- Page 17 5 mm AIR RANDOM ORBITAL SANDER FGA 340 The reproduction of this document (even in partial form) is prohibited without the Fasangas S.r.l. authorization...
Need help?
Do you have a question about the FGA 340 and is the answer not in the manual?
Questions and answers