Know Your Product LED Screen Power Button Air Hose Interface Smart Clamp Plug Lighting Button "+" Button Red Jump Cable(+) Mode Button USB-C Input Indicator Light USB1-OUT "-" Button Black Jump Cable(-) USB2-OUT Inflate Button Force Start Button Jump Start Port Unit Button LED Light...
Charging Your Jump Starter 1.Please use the included USB-C charging cable and adapter (5V/2A and above) to charge the product. (adapter is not included) 2.It will take about 5 hours to fully charge the unit when using a 5V/2A adapter. In order to extend the battery life, please fully charge the unit every 3 months.
Page 4
How to Inflate Car Tire 1.Take out the device and connect the air hose and tighten it, press the Power button to start the device, press the Mode button to enter the inflation mode 2.Press the Mode button to select the inflation mode, press the Unit button to switch 3 kinds of unit, press the "+"...
“E7”- Cylinder over temperature protection: Automatically release the protection when the temperature is lower than 70°℃. After the protection is released, please wait for 10 minutes before continuing to operate Specifications Acmount W160 Car Jump Starter Mode USBOutput1 5V/2.4A USBOutput2 5V/2.4A,9V/2A,12V/1.5A...
Page 6
Package Conten Acmount W160 Jump Starter with Air Compressor *1 Gas Nozzles *4 Air Pump Hose *1 Smart Jumper Clamps *1 USB-C Charging Cable *1 User Manual*1 Portable Storage Bag *1 Maintenanc 1.Do not use the product to start an already expanded car battery.
Need help?
Do you have a question about the W160 and is the answer not in the manual?
Questions and answers