15 seconds between unplugging and replugging. 2. Avoid spilling liquid into the machine. Do not store pitchers on the machine. 3. Only use mild detergents for cleaning. 4. CAUTION – Risk of fire and electric shock. Replace only with the manufacturer's cord set POURSTEADY...
Water pressure: 1587 psi 0.1 - 0.6MPa, or 1 - 6 Bar) ○ Line in via ¼ˮ Push-To-Connect PTC fitting ● Cutoff valve recommended under the counter below the ● check valve installed following water Poursteady with hookup Recommended water quality: ● Conductivity/T.D.S.: 120400μS 60220ppm) ○ Total Hardness: 50160ppm 39°dH...
Page 8
Cut a 1.75 in 45mm hole in the counter as shown below: ● Prepare the Poursteady Place the Poursteady PS2 with the left side of the device ● facing the operator over the hole. Remove the left-hand cover by first removing the 2 screws ●...
(about 2 minutes) You are ready to go! ● Getting started If this is the first time you are turning the PS2 on, you will be ● prompted on the screen to answer a few questions after the machine has booted up.
Operation Guide With your Poursteady PS2 now plumbed and powered on, you are ready to make coffee. You can also create, save, and assign recipes to each station using the display on your device. Recipes Poursteady PS2 comes with several pre-programmed ●...
Page 11
Making Coffee The default PS2 screen will show the recipe assigned to that station. If you press the knob, it will begin making that recipe. Before pressing the knob, place the coffee filter, dripper, and ● carafe under the desired station on PS2.
Page 13
Pour(s): pour patterns, pour size, wait times, and ○ number of pours When finished, scroll to the bottom and select “Save recipeˮ. ● Your recipe is now created and saved. You will see it in your ● recipes list. Happy brewing! POURSTEADY...
Internet will also enable access to Poursteadyʼs online platform to access our analytics tools in future updates. The PS2 can be connected via onboard Ethernet or via USB wifi adapter. If there is a firewall, or other rules on the network that ⚠...
Page 17
● With the screens facing you, remove the left panel of the ● PS2 Device, exposing the cabling and connections panel. Insert the USB cable on your wifi dongle into the PS2 USB ● port. Power on the machine Switch on the device using the power switch.
Page 18
“Settingsˮ → “Machine Infoˮ and verifying that an IP address is present. If this fails, your Poursteady will restart the ● “Poursteady-psXXXˮ access point and you can return to Step 3 to try again.
Daily Cleaning Do not use any abrasives when cleaning the Poursteady. ⚠ This may scratch the bare metal finishes. Clean all exposed surfaces with a damp cloth and mild ●...
Accessories Note: these items are not necessarily included Tall Filter Rack Pairs best with flat bottom drippers (ie: Kalita Wave) Short Filter Rack Pairs best with conical drippers (ie: V60 POURSTEADY...
Need help?
Do you have a question about the PS2 and is the answer not in the manual?
Questions and answers