Download Print this page

Barton 95516 Owner's Manual And Safety Instructions

High pressure propane stove burner

Advertisement

Quick Links

HIGH PRESSURE PROPANE STOVE BURNER
ITEM: 95516
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Advertisement

loading
Need help?

Need help?

Do you have a question about the 95516 and is the answer not in the manual?

Questions and answers

Summary of Contents for Barton 95516

  • Page 1 HIGH PRESSURE PROPANE STOVE BURNER ITEM: 95516 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read these instructions for use carefully. Familiarise yourself with the appliance before connecting it to a gas cylinder. Keep these instructions for future reference. This instruction manual contains important information necessary for the proper assembly and safe use of the appliance. Follow all warnings and instructions when using the appliance.
  • Page 3 IMPORTANT SAFETY INFORMATION This product is fueled by propane gas. Propane gas is invisible, odorless,and flammable. An odorant is normally added to help detect leaks and can be described as a “rotten egg” smell. The odorant can fade over time so leaking gas is not always detectable by smell alone. Propane gas is heavier than air and leaking propane will sink to the lowest level possible.
  • Page 4 Always wear shoes while cooking. Use Barton appliances only in accordance with state and local ordinances and codes. In the absence of local codes, installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58 or CSA B149.1, Natural Gas and Propane...
  • Page 5 PARTS and ATTRIBUTES CONNECTOR BOTTOM RACK HOLDERS REGULATOR BURNER TOP RACK 37,000 BTU Heavy duty burner with weatherproof coating frame CSA certified regulator, hose and connector included Detachable holders for easy storage...
  • Page 6: Operation

    OPERATION 1. The hose and regulator is a pre-assembled unit. DO NOT take apart. Simply connect the hose and regulator assembly to the LP gas cylinder and to the cooker. 2. Make sure the valve on the LP cylinder is clean. Connect the hose to the cylinder valve by turning the hand wheel to the right.
  • Page 7 DISCLAIMER Intense heat from the cooker will burn away paint from parts of the frame and windscreen flashing. This will cause a slight ‘odor’ for a few minutes during the initial use. The exposed steel will rust. Occasional care must be taken to prolong the life of your cooker. 1.