DVI IONIC DVP41971 Assembly Instructions

IONIC
ASSEMBLY INSTRUCTIONS
DVP41971
DVP41972
Warning
All electrical connections must be made according to local
codes. If you feel you do not have the experience necessary
to do this, please have your fixture installed by a qualified,
licensed electrician.
Make sure to note the maximum recommended wattage for
your light fixture.
DO NOT EXCEED THE RECOMMENDED WATTAGE:
DVP41971 - 1 x 25W GU10
DVP41972 - 2 x 25W GU10
Cleaning
We recommend that you use a mild detergent, such as dish
washing soap, and warm water to clean the glass and metal
surfaces. After cleaning, make sure to dry the fixture
completely because moisture will corrode the satin finish.
Use a damp soft cloth to wipe o
abrasive pads or cleaning materials.
During installation, some fixtures may require subtle
adjustments in order for the fixture to look as intended.
Tools
Phillips head screwdriver
If you have and questions,comments, or concerns
contact us at customerservice@dvi.lighting
DVI Lighting
120 Great Gulf Drive, Concord
Ontario, L4K 5W1 Canada
T: 1 855 384 5483
F: 1 855 384 8435
FOLLOW US: facebook.com/dvilighting
1
dust. DO NOT use
@dvi.lighting
2
A
B
C
A. Connect the copper ground wire to ground wire - If you
only have two wires coming from the electrical box,
connect the fixture's copper wire to the green ground
screw on the mounting plate.
B. Connect the white fixture wire to white supply wire.
C. Connect the black fixture wire to black supply wire.
@dvilighting pinterest.com/dvilighting
These instructions are property of DVI Lighting. Do not copy or reproduce.
www.dvi.lighting