Table of Contents
Advertisement
18
2 2 16 8
11 8 5.6
If you use infrared film with an R2
or O2 filter, the point of focus differs
from normal shooting (with visible
light). This means the point of focus
must be corrected.
* Infrared film cannot be used with
the MZ-S, MZ-60, and
eras since these cameras use
infrared light to detect film transport
operations.
Using the Infrared Index
8
10
3 2
cam-
2 2 16 8
11 8 5.6
When the subject is in focus in the view-
finder, note the point of focus on the
distance scale (shown in the left illustra-
tion). Then turn the focusing ring so the
respective point of focus on the distance
scale is aligned with the infrared index
mark, as shown in the right illustration.
* Before turning the focusing ring, set
the focus mode to manual focus.
* To determine the proper exposure,
refer to the film's instruction manual.
8
10
3 2 1
Advertisement
Table of Contents
