Diamond D3 Series Owner's Manual page 13

Mixed-Mode System On Rear Full-Range
Speakers On Front
SOURCE
2CH BASS 2CH 4CH
D3 400.4
LOW HIGH FULL LOW HIGH FULL
NOTE Chart values based on 4 ohm speakers.
Fig.13
The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4
amplifier sections. The table provides component values to create a 6dB per octave crossover at
specified frequencies. Use the same frequency for both LP and HP crossovers. Do not overlap
frequencies, as this may damage the amplifier.
13