Red Hat NETWORK SATELLITE 5.3.0 Reference Manual page 119

Kickstart —
7.4.9.3.4. Kickstart Details Advanced Options —
From this page, you can toggle several installation options on and off by checking and unchecking
the boxes to the left of the option. For most installations, the default options are correct. The Red Hat
Enterprise Linux System Administration Guide discusses each of these options in detail.
7.4.9.3.5. Kickstart Details Bare Metal Kickstart —
This sub-tab provides the information necessary to kickstart systems that are not currently registered
with RHN. Using the on-screen instructions, you may either kickstart systems using boot media (CD-
ROM) or by IP address.
7.4.9.3.6. System Details Details —
Figure 7.10. System Details
The figure above shows the sub-tabs that are available from the System Details tab.
From the System Details Details sub-tab, you can:
• Select from DHCP and static IP, depending on your network
• Choose the level of SELinux that is configured on kickstarted systems
• Enable configuration management or remote command execution on kickstarted systems
• Change the root password associated with this profile
7.4.9.3.7. System Details Locale —
From this sub-tab, you can change the timezone associated with kickstarted systems.
7.4.9.3.8. System Details Partitioning —
From this sub-tab, you can indicate the partitions that you wish to be created during installation. For
example:
partition /boot --fstype=ext3 --size=200
partition swap --size=2000
partition pv.01 --size=1000 --grow
volgroup myvg pv.01 logvol / --vgname=myvg --name=rootvol --size=1000 --grow
107