Canon CT-50 Instructions

CT-50
Timer Clock / Jam Timer/
Đồng hồ Hẹn giờ / 타이머 시계
E-IM-3183
• When using this product, please read all the operating instructions, warnings
and precautions provided by Canon.
• After reading this manual, please keep it for future reference.
WARNING:
at the back. Please be careful if implanted electronic
devices (such as cardiac pacemaker) nearby, as magnet may
cause malfunctions. If this happens, please distance the magnet
from the implanted electronic device and consult the doctor
at once.
• Remove the insulation tape (
of the unit before use.
Insulation
• Press to select the function mode in the following order:
Clock → Count-up Timer → Timer → Back to Clock.
Example: 3:45PM (24-hours basis 15:45)
1) Go to Clock Mode : Press
"CLOCK" icon will be shown on the display.
Press and hold
clock setting mode. (The display will flash.)
2) Press ,
• The time will blink in clock setting mode.
3) Press
• Use to switch between 12 or 24 hour format.
■ Press , or no keys are pressed during clock setting mode for 5 seconds,
edit will be aborted.
1) Go to Count-up Timer Mode :
Press to select Count-Up Timer mode.
"COUNT UP" icon will be shown.
2) Press
(Timer can count-up to a maximum of 23 hours, 59 minutes, 59 seconds).
3) Press
simply press
4) To reset the count-up timer, press
stopped.
This product is embedded with magnet
RESET
tape
for more than 2 seconds to enter
, keys to set the time.
to confirm the time.
to start the count-up.
to pause or stop the count-up. To continue the count-up,
once.
) and press [RESET] button (
to select Clock mode.
right after the count-up timer is
www.canon.com/calcmanual
Instructions
Hướng dẫn
) at the back side
RESET
EN
Instruksi
IN
VI
설명서 KR
ENGLISH
RESET
Magnet