Mysql Installation - Red Hat NETWORK SATELLITE SERVER 4.1.0 Installation Manual

Chapter 4. Installation
To configure sendmail correctly, run the following commands as root. First, create a sym-
bolic link allowing sendmail to run the notification enqueuer with the following command:
ln -s /opt/notification/scripts/ack_enqueuer.pl /etc/smrsh/.
Next, edit the
/etc/aliases
rogerthat01: | /etc/smrsh/ack_enqueuer.pl
Next, edit the
/etc/mail/sendmail.mc
"DAEMON_OPTIONS('Port=smtp,Addr=127.0.0.1, Name=MTA')dnl"
to:
"DAEMON_OPTIONS('Port=smtp, Name=MTA')dnl"
Then, have the alias processed like so:
newaliases
Finally, update the
up2date sendmail-cf
Note, disconnected installs must obtain this package from the ISO.
Restart sendmail:
service sendmail restart

4.5. MySQL Installation

This sections is applicable only if your RHN Satellite Server will serve Monitoring-entitled
systems and you wish to run MySQL probes against them. Refer to the Probes appendix
of the RHN Reference Guide for a list of available probes.
If you do wish to run MySQL probes, subscribe the Satellite to the Red Hat Enterprise
Linux AS Extras channel and install the
website or
up2date
Two extra packages will also be downloaded in the transaction. These are needed for the
package to be installed and run successfully. Once finished, your Satellite
mysql-server
may be used to schedule MySQL probes.
file on the mail server and add the following line:
package:
sendmail-cf
.
file and change:
package either through the RHN
mysql-server
33