Page 1
1 1 B 1 1 B 1 1 B 6 B 1 2 B 1 2 B 1 2 B 7 B 1 3 B 1 3 B 1 3 B 8 B URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 1 of 15...
Standard Accessory Name Quantity MCU Board Adaptor Board Power Adaptor (12V 1A) USB Cable 1.3 Compatible with following display: Part Number(Order Number) Description ER-EPD0213-2 2.13 inch E-Paper (E-ink) Display URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 3 of 15...
2-1 Simply plug the power adaptor into an AC outlet and plug FFC(Cable) of lcd display into the ZIF connector of adaptor board as the below image shows. 2-2 Press the power button to run the demonstration program. URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 4 of 15...
Press On or Press Off *For color display, this button is used to next the image slideshows. For mono display, this button is used to stop the image slideshows. URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 5 of 15...
STANDARD VALUE UNIT Microcontroller STC89LE52RC I nterface 6800/8080 8-bit Parallel,4-wire Serial 1 1 5 B 1 1 2 B 1 0 9 B 9 5 B Power Supply Voltage URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 6 of 15...
8051 Development Board User Guide ER-DBE0213-2 EastRising buydisplay.com 5. OUTLINE DRAWING 4 5 9 B 1 3 7 B 4 5 6 B 1 3 4 B 4 5 3 B URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 7 of 15...
7-1-2 No power supply is connecting with 8051 development board, 7-7-3 The jumpers on JP8 is on ISP position as below image shows 7-2 Install the USB to RS232 Driver http://www.buydisplay.com/download/software/USB-TO-RS232-DRIVER.rar URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 8 of 15...
Page 9
7-4 Install STC 8051 Microcontroller ISP(In System Programming)Software http://www.buydisplay.com/download/software/STC-ISP-V4.86-NOT-SETUP-ENGLISH.zip 7-5 Open ISP and Select COM Port that should be the same with the step 7-2 you see from Device Manager. URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 9 of 15...
Page 10
7-6 Select MCU part number that should be the same with your purchased one. (Refer to 4.2 Electrical Specification) 7-7 Open target “,hex” file by clicking open code file URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 10 of 15...
Page 11
8051 Development Board User Guide ER-DBE0213-2 EastRising buydisplay.com 7-8 Programming 7-8-1 Click Download/Program 7-8-2 Then you will see ”Checking target MCU….” URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 11 of 15...
Page 12
8051 Development Board User Guide ER-DBE0213-2 EastRising buydisplay.com 7-8-3 Power on the development board by pressing the white power button 7-8-4 Now you could see the process of programming URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 12 of 15...
Page 13
8051 Development Board User Guide ER-DBE0213-2 EastRising buydisplay.com 7-8-5 Progarmming Finished 8 Please move the jumpers on JP8 from ISP to N_ISP as below image shows. URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 13 of 15...
(for example, fingerprints) and any foreign matter. If you no longer have the protective film, use standard transparent office tape . If the polarizer is dusty, you may carefully blow it off with clean, dry, oil-free compressed air. URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 14 of 15...
Page 15
Rapid temperature changes can cause moisture to form, resulting in permanent damage. ◇ Do not allow weight to be placed on the modules while they are in storage. ◇ Please recycle your outdated displays at an approved facility. URL: www.buydisplay.com Document Name: ER-DBE0213-2 User Guide-Rev1.0 Page: 15 of 15...
Need help?
Do you have a question about the ER-DBE0213-2 and is the answer not in the manual?
Questions and answers