Table of Contents
Advertisement
16
Chapter 2. Red Hat Update Agent
you must include packages in your profile to have RHN send you Errata regarding them. You should
also note if you use an older version of a package and deselect it from the list, it will not be replaced
with a newer version.
This RPM list can be modified through the Red Hat Network Web interface or by using the Red Hat
Update Agent. Figure 2-9 shows the progress bar you will see while the Red Hat Update Agent
gathers a list of the RPM packages installed on your system. This operation may take some time,
depending on your system installation.
Figure 2-9. Registration Wizard
Once the RPM package list is built, the list will be displayed as shown in Figure 2-10. Deselecting
Include RPM Packages installed on this system in my System Profile will omit this information
from your System Profile.
Figure 2-10. RPM Package Information
Advertisement
Table of Contents
