Red Hat NETWORK 4.0.5 - CLIENT Configuration Manual page 13

Chapter 2. Client Applications
settings in the
/etc/sysconfig/rhn/up2date
default Red Hat Network URL with the fully qualified domain name (FQDN) for the RHN
Proxy Server or RHN Satellite Server. For example:
serverURL[comment]=Remote server URL
serverURL=https://your_primary.your_domain.com/XMLRPC
noSSLServerURL[comment]=Remote server URL without SSL
noSSLServerhttp://your_primary.your_domain.com/XMLRPC
Warning
The
httpProxy
Proxy Server. It is used to configure an optional HTTP proxy for the client. With an RHN
Proxy Server in place, the
Skip this section if you are running Red Hat Enterprise Linux 3 or later on the client system.
Note
You must use version 2.7.11 or higher of
recognize new certificates. This RPM should be available in
your proxy system after running
To configure the Red Hat Network Registration Client on the client systems connecting
to the RHN Proxy Server or RHN Satellite Server, edit the values of the
noSSLServerURL
file (as root). Replace the default Red Hat Network URL with the fully qualified domain
name (FQDN) for the RHN Proxy Server or RHN Satellite Server. For example:
serverURL[comment]=Remote server URL
serverURL=https://your_proxy_or_sat.your_domain.com/XMLRPC
noSSLServerURL[comment]=Remote server URL without SSL
noSSLServerURL=http://your_proxy_or_sat.your_domain.com/XMLRPC
setting in
/etc/sysconfig/rhn/up2date
httpProxy
up2date
options in the
/etc/sysconfig/rhn/rhn_register
configuration file (as root). Replace the
setting must be blank (not set to any value).
rhn_register
for the Proxy.
does not refer to the RHN
on client systems so they can
/var/spool/up2date
serverURL
configuration
9
on
and