Configuring The Red Hat Network Alert Notification Tool With Satellite - Red Hat NETWORK 3.6 - CLIENT Configuration Manual

Chapter 2. Client Applications
To configure the Red Hat Update Agent on the client systems connecting to the RHN Proxy Server
or RHN Satellite Server, edit the values of the
/etc/sysconfig/rhn/up2date
URL with the fully qualified domain name (FQDN) for the RHN Proxy Server or RHN Satellite
Server. For example:
serverURL[comment]=Remote server URL
serverURL=https://your_proxy_or_sat.your_domain.com/XMLRPC
noSSLServerURL[comment]=Remote server URL without SSL
noSSLServerURL=http://your_proxy_or_sat.your_domain.com/XMLRPC
Warning
The setting in
httpProxy
is used to configure an optional HTTP proxy for the client. With an RHN Proxy Server in place, the
setting must be blank (not set to any value).
httpProxy
Skip this section if you are running Red Hat Enterprise Linux 3 later on the client system.
Note
You must use version 2.7.11 or higher of
new certificates. This RPM should be available in
you run
up2date
To configure the Red Hat Network Registration Client on the client systems connecting to the RHN
Proxy Server or RHN Satellite Server, edit the values of the
tions in the
/etc/sysconfig/rhn/rhn_register
Red Hat Network URL with the fully qualified domain name (FQDN) for the RHN Proxy Server or
RHN Satellite Server. For example:
serverURL[comment]=Remote server URL
serverURL=https://your_proxy_or_sat.your_domain.com/XMLRPC
noSSLServerURL[comment]=Remote server URL without SSL
noSSLServerURL=http://your_proxy_or_sat.your_domain.com/XMLRPC
2.3. Configuring the Red Hat Network Alert Notification Tool with
Satellite
The Red Hat Network Alert Notification Tool, that nifty round icon in the panel of your Red Hat
desktop, can be configured on systems running Red Hat Enterprise Linux 3 or later to recognize
updates available from custom channels on your RHN Satellite Server. In addition, you must ensure
the Satellite itself is prepared to support this feature. (RHN Proxy Server supports the applet without
modification of client or server.) Here's the flow:
configuration file (as root). Replace the default Red Hat Network
/etc/sysconfig/rhn/up2date
for the Proxy.
and
serverURL
does not refer to the RHN Proxy Server. It
on the client systems so they can recognize
rhn_register
/var/spool/up2date
serverURL
configuration file (as root). Replace the default
settings in the
noSSLServerURL
on your proxy system after
and
noSSLServerURL
7
op-