Relevant Errata; All Errata - Red Hat NETWORK 3.2 - MANAGEMENT Reference Manual

58
— Enhancement Updates available
•

4.5.1. Relevant Errata

As shown in Figure 4-5, the Relevant Errata page displays a customized list of Errata Alerts that
applies to your registered systems. The list provides a summary of each Errata Alert, including its
type, advisory, synopsis, systems affected, and date updated.
Figure 4-5. Errata List
Clicking on the Advisory takes you to the Details tab of the Errata Details page. Clicking on the
number of associated systems takes you to the Affected Systems tab of the Errata Details page.
Refer to Section 4.5.2.2 Errata Details for more information.

4.5.2. All Errata

The All Errata page displays a list of all Errata Alerts released by Red Hat. It works much the same
as the Relevant Errata page in that clicking either the Advisory or the number of systems affected
takes you to related tabs of the Errata Details page. Refer to Section 4.5.2.2 Errata Details for more
information.
4.5.2.1. Apply Errata Updates
Errata Alerts include a list of updated packages that are required to apply the Errata Update. To apply
Errata Updates to a system, the system must be entitled.
You can apply all applicable Errata Updates to a system by clicking on Systems => Systems in the
top and left navigation bars. Click on the name of an entitled system, and click the Errata tab of the
resulting System Details page. When the Relevant Errata list appears, click Select All then the Apply
Errata button on the bottom right-hand corner of the page. Only those Errata that have not been
scheduled or were scheduled and failed or canceled are listed. Updates already pending are excluded
from the list.
In addition, Management users can apply Errata Updates using two other methods:
To apply a specific Errata Update to one or more systems, find the update within the Errata lists or by
•
searching. In the table, click on the number of systems affected, which will take you to the Affected
Systems tab of the Errata Details page. Then, individually select the systems to be updated and
click the Apply Errata button. Double-check the systems to be updated on the confirmation page,
then click the Confirm button.
Chapter 4. Red Hat Network Website