Related Manuals for Yuwell YT-1
Summary of Contents for Yuwell YT-1
- Page 1 YT-1 Infrared Thermometer User Manual And Technical Instruction Please read the user manual carefully and follow the instructions before use. For date of manufacture, please refer to the packing.
- Page 2 1. Device use and applicant scope ●This device is used to measure the body temperature by passively sensing infrared heat radiation collected from human body's forehead, which can be used for families and medical departments measure body temperature . ●Intended use and application scope: This device is used to measure the forehead temperature of the human body, which is applicable to infants, children and adults.
-
Page 3: Matters Need Attention
Symbols Implication Type BF application part Caution! Consult instruction of product Paper recycling This side up Fragile Non-rainproof Not to be disposed of as ordinary waste Electronic information product pollution control mark environmental protection use period is 10 years. Consumables are not included 4. - Page 4 10. If there is temperature difference compared environment of the device storage with that of the measuring environment, place the device in the measuring environment for more than 30 minutes, otherwise there may be error for the measurement result. 11. When lens of sensor becomes dirty, please wipe it gently with a soft dry cloth or cotton swab.
- Page 5 ●Measure temperature of human body 1.Point the infrared thermometer probe at the center of eyebrow, within 0-5cm of the forehead (do not touch the forehead directly). 2.Press the Start measuring button “ ”. After about 1 second, the infrared thermometer will have vibration sound prompts...
- Page 6 cotton swab. Disinfection of the product and its head: Gently wipe the surface of the product and the head used for measurement with a cotton swab dipped in a little medical alcohol (70%), it can be used until the alcohol has completely evaporated.
-
Page 7: Warranty Card
●Safety classification: the device that cannot be used in the presence of flammable anesthetic gases mixed with air or oxygen or nitrous oxide ●Product size: 149×38×42(mm) ●Product weight:about 68g (not including cell) 10. Warranty card Warranty card Product name: Infrared thermometer Model: YT-1... - Page 8 11.The Use of Electromagnetic Environment Guidance This product complies with the Electromagnetic Compatibility (EMC) standard for safe operation of electrical equipment medical YY0505-2012. The standard of YY0505-2012 (item 6.8.2.201) stipulates that users should be provided with detailed information related to EMC environment for safe operation of equipment.
- Page 9 Table 1 - Guidelines and Manufacturer's Declaratio - Electromagnetic Radiation --About all medical electrical equipment and systems. Guidelines and Manufacturer's Declaration - Electromagnetic Radiation The product should only be operated in the electromagnetic environment specified below. Purchasers and users should ensure that the product is operated in the specified electromagnetic environment.
- Page 10 Electrostatic Exposue Exposue It is highly discharge ±6kV ±6kV recommended to (ESD) GB/T Air±8kV pave the ground 17626.2 ±8kV with wooden, concrete or tile floorings. When the flooring is coated with synthetic materials,the relative humidity (RH) is recommended to be reduced by 30%.
- Page 11 Table 3 - Guidelines and Manufacturer's Declaration - Electromagnetic Immunity - About medical electrical equipment and systems for non-life support Guidelines and Manufacturer's Declaration - Electromagnetic Immunity The product should only be operated in the electromagnetic environment specified below. Purchasers and users should ensure that the product is operated in the specified electromagnetic environment.
- Page 12 Table 4 - The recommended separation distance between portable,mobile RF communication devices and medical electrical equipment or systems The recommended separation distance between portable , mobile RF communication devices and the product The product should be operated in an electromagnetic environment where the RF interference is under control.
- Page 13 Toxic and hazardous substances and the associated compounds or elements Toxic and hazardous substances and the associated compounds or elements Lead Mercu Cadmi Hexav Polybr Polybr and its ry and alent ominat ominat compo and its chromi Part unds≤ compo compo biphen diphen...
- Page 14 Registrant / Production Enterprise / After-sales Service Unit: Jiangsu Yuyue Medical Equipment Co., Ltd. Address / Production Address: Yunyang Industrial Park (South of Zhenxin Road), Danyang City, Jiangsu Province Tel: 0511-86900833 Zip code: 212300 Revision date: April, 2019...
Need help?
Do you have a question about the YT-1 and is the answer not in the manual?
Questions and answers