Netscape MANAGEMENT SYSTEM 6.2 - COMMAND-LINE Manual page 21

Command-line tools guide
Table of Contents

Advertisement

What you do next depends on which version you are converting. Follow
b.
the steps below that apply to the version you are converting:
For migrating from CMS 4.2/CMS 4.2 (SP 1) or CMS 4.2 (SP 1a):
Remove the following file from the new server:
i.
<62_server_root>/alias/cert-<instance>-<hostname>-cert8.d
b
Copy the following filefrom the old server:
ii.
<old_server_root>/cert-<instance>/config/cert7.db
to the following location in the new server:
<62_server_root>/alias/cert-<instance>-<hostname>-cert7.d
b
Copy the following file from the older server:
iii.
<old_server_root>/cert-<instance>/config/key3.db
to the following location in the new server:
<62_server_root>/alias/cert-<instance>-<hostname>-key3.db
(overwrite this file)
Copy the following file from the older server:
iv.
<old_server_root>/admin-serv/config/secmodule.db
to the following location in the new server:
<62_server_root>/alias/secmod.db
(overwrite this file)
For migrating from CMS 4.2 (SP 2) or CMS 4.5:
Remove the following file from the new server:
i.
<62_server_root>/alias/cert-<instance>-<hostname>-cert8.d
b
Copy the following file from the older server:
ii.
<old_server_root>/cert-<instance>/config/cert7.db
to the following location in the new server:
<62_server_root>/alias/cert-<instance>-<hostname>-cert7.d
b
Copy the following file from the older server:
iii.
<old_server_root>/cert-<instance>/config/key3.db
to the following location in the new server:
<62_server_root>/alias/cert-<instance>-<hostname>-key3.db
(overwrite this file)
Chapter 2
CMS Upgrade Utility
Upgrading
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Certificate management system 6.2

Table of Contents